Kerbal Space Program

[    0.000000] Initializing cgroup subsys cpuset

[    0.000000] Initializing cgroup subsys cpu

[    0.000000] Initializing cgroup subsys cpuacct

[    0.000000] Linux version 3.13.0-32-generic (buildd@kissel) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #57-Ubuntu SMP Tue Jul 15 03:51:08 UTC 2014 (Ubuntu 3.13.0-32.57-generic 3.13.11.4)

[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-32-generic root=UUID=57dc3c09-fde8-4ccd-bfe5-a99cc87a67d7 ro quiet splash vt.handoff=7

[    0.000000] KERNEL supported cpus:

[    0.000000]   Intel GenuineIntel

[    0.000000]   AMD AuthenticAMD

[    0.000000]   Centaur CentaurHauls

[    0.000000] e820: BIOS-provided physical RAM map:

[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000097fff] usable

[    0.000000] BIOS-e820: [mem 0x0000000000098000-0x000000000009ffff] reserved

[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved

[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cfd80fff] usable

[    0.000000] BIOS-e820: [mem 0x00000000cfde0000-0x00000000cfde2fff] ACPI NVS

[    0.000000] BIOS-e820: [mem 0x00000000cfde3000-0x00000000cfdeffff] ACPI data

[    0.000000] BIOS-e820: [mem 0x00000000cfdf0000-0x00000000cfdfffff] reserved

[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved

[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved

[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000022fffffff] usable

[    0.000000] NX (Execute Disable) protection: active

[    0.000000] SMBIOS 2.4 present.

[    0.000000] DMI: Gigabyte Technology Co., Ltd. GA-770TA-UD3/GA-770TA-UD3, BIOS F3 05/13/2010

[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved

[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable

[    0.000000] No AGP bridge found

[    0.000000] e820: last_pfn = 0x230000 max_arch_pfn = 0x400000000

[    0.000000] MTRR default type: uncachable

[    0.000000] MTRR fixed ranges enabled:

[    0.000000]   00000-9FFFF write-back

[    0.000000]   A0000-BFFFF uncachable

[    0.000000]   C0000-C7FFF write-protect

[    0.000000]   C8000-FFFFF uncachable

[    0.000000] MTRR variable ranges enabled:

[    0.000000]   0 base 000000000000 mask FFFF80000000 write-back

[    0.000000]   1 base 000080000000 mask FFFFC0000000 write-back

[    0.000000]   2 base 0000C0000000 mask FFFFF0000000 write-back

[    0.000000]   3 base 0000CFE00000 mask FFFFFFE00000 uncachable

[    0.000000]   4 base 000100000000 mask FFFF00000000 write-back

[    0.000000]   5 base 000200000000 mask FFFFE0000000 write-back

[    0.000000]   6 base 000220000000 mask FFFFF0000000 write-back

[    0.000000]   7 disabled

[    0.000000] TOM2: 0000000230000000 aka 8960M

[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106

[    0.000000] original variable MTRRs

[    0.000000] reg 0, base: 0GB, range: 2GB, type WB

[    0.000000] reg 1, base: 2GB, range: 1GB, type WB

[    0.000000] reg 2, base: 3GB, range: 256MB, type WB

[    0.000000] reg 3, base: 3326MB, range: 2MB, type UC

[    0.000000] reg 4, base: 4GB, range: 4GB, type WB

[    0.000000] reg 5, base: 8GB, range: 512MB, type WB

[    0.000000] reg 6, base: 8704MB, range: 256MB, type WB

[    0.000000] total RAM covered: 3326M

[    0.000000] Found optimal setting for mtrr clean up

[    0.000000]  gran_size: 64K 	chunk_size: 4M 	num_reg: 4  	lose cover RAM: 0G

[    0.000000] New variable MTRRs

[    0.000000] reg 0, base: 0GB, range: 2GB, type WB

[    0.000000] reg 1, base: 2GB, range: 1GB, type WB

[    0.000000] reg 2, base: 3GB, range: 256MB, type WB

[    0.000000] reg 3, base: 3326MB, range: 2MB, type UC

[    0.000000] e820: update [mem 0xcfe00000-0xffffffff] usable ==> reserved

[    0.000000] e820: last_pfn = 0xcfd81 max_arch_pfn = 0x400000000

[    0.000000] found SMP MP-table at [mem 0x000f4590-0x000f459f] mapped at [ffff8800000f4590]

[    0.000000] Scanning 1 areas for low memory corruption

[    0.000000] Base memory trampoline at [ffff880000092000] 92000 size 24576

[    0.000000] Using GB pages for direct mapping

[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]

[    0.000000]  [mem 0x00000000-0x000fffff] page 4k

[    0.000000] BRK [0x01fdf000, 0x01fdffff] PGTABLE

[    0.000000] BRK [0x01fe0000, 0x01fe0fff] PGTABLE

[    0.000000] BRK [0x01fe1000, 0x01fe1fff] PGTABLE

[    0.000000] init_memory_mapping: [mem 0x22fe00000-0x22fffffff]

[    0.000000]  [mem 0x22fe00000-0x22fffffff] page 2M

[    0.000000] BRK [0x01fe2000, 0x01fe2fff] PGTABLE

[    0.000000] init_memory_mapping: [mem 0x22c000000-0x22fdfffff]

[    0.000000]  [mem 0x22c000000-0x22fdfffff] page 2M

[    0.000000] init_memory_mapping: [mem 0x200000000-0x22bffffff]

[    0.000000]  [mem 0x200000000-0x22bffffff] page 2M

[    0.000000] init_memory_mapping: [mem 0x00100000-0xcfd80fff]

[    0.000000]  [mem 0x00100000-0x001fffff] page 4k

[    0.000000]  [mem 0x00200000-0x3fffffff] page 2M

[    0.000000]  [mem 0x40000000-0xbfffffff] page 1G

[    0.000000]  [mem 0xc0000000-0xcfbfffff] page 2M

[    0.000000]  [mem 0xcfc00000-0xcfd80fff] page 4k

[    0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]

[    0.000000]  [mem 0x100000000-0x1ffffffff] page 1G

[    0.000000] RAMDISK: [mem 0x35b66000-0x36daafff]

[    0.000000] ACPI: RSDP 00000000000f5fa0 000014 (v00 GBT   )

[    0.000000] ACPI: RSDT 00000000cfde3000 00003C (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)

[    0.000000] ACPI: FACP 00000000cfde3040 000074 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)

[    0.000000] ACPI: DSDT 00000000cfde30c0 007475 (v01 GBT    GBTUACPI 00001000 MSFT 03000000)

[    0.000000] ACPI: FACS 00000000cfde0000 000040

[    0.000000] ACPI: SSDT 00000000cfdea600 00088C (v01 PTLTD  POWERNOW 00000001  LTP 00000001)

[    0.000000] ACPI: HPET 00000000cfdeaec0 000038 (v01 GBT    GBTUACPI 42302E31 GBTU 00000098)

[    0.000000] ACPI: MCFG 00000000cfdeaf00 00003C (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)

[    0.000000] ACPI: TAMG 00000000cfdeaf40 00038A (v01 GBT    GBT   B0 5455312E BG?? 53450101)

[    0.000000] ACPI: APIC 00000000cfdea540 0000BC (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)

[    0.000000] ACPI: Local APIC address 0xfee00000

[    0.000000] Scanning NUMA topology in Northbridge 24

[    0.000000] No NUMA configuration found

[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000022fffffff]

[    0.000000] Initmem setup node 0 [mem 0x00000000-0x22fffffff]

[    0.000000]   NODE_DATA [mem 0x22fff9000-0x22fffdfff]

[    0.000000]  [ffffea0000000000-ffffea0008bfffff] PMD -> [ffff880227600000-ffff88022f5fffff] on node 0

[    0.000000] Zone ranges:

[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]

[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]

[    0.000000]   Normal   [mem 0x100000000-0x22fffffff]

[    0.000000] Movable zone start for each node

[    0.000000] Early memory node ranges

[    0.000000]   node   0: [mem 0x00001000-0x00097fff]

[    0.000000]   node   0: [mem 0x00100000-0xcfd80fff]

[    0.000000]   node   0: [mem 0x100000000-0x22fffffff]

[    0.000000] On node 0 totalpages: 2096408

[    0.000000]   DMA zone: 64 pages used for memmap

[    0.000000]   DMA zone: 21 pages reserved

[    0.000000]   DMA zone: 3991 pages, LIFO batch:0

[    0.000000]   DMA32 zone: 13239 pages used for memmap

[    0.000000]   DMA32 zone: 847233 pages, LIFO batch:31

[    0.000000]   Normal zone: 19456 pages used for memmap

[    0.000000]   Normal zone: 1245184 pages, LIFO batch:31

[    0.000000] ACPI: PM-Timer IO Port: 0x4008

[    0.000000] ACPI: Local APIC address 0xfee00000

[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)

[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)

[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)

[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)

[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled)

[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled)

[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled)

[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)

[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])

[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])

[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])

[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])

[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])

[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])

[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])

[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])

[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])

[    0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23

[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)

[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)

[    0.000000] ACPI: IRQ0 used by override.

[    0.000000] ACPI: IRQ2 used by override.

[    0.000000] ACPI: IRQ9 used by override.

[    0.000000] Using ACPI (MADT) for SMP configuration information

[    0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000

[    0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs

[    0.000000] nr_irqs_gsi: 40

[    0.000000] PM: Registered nosave memory: [mem 0x00098000-0x0009ffff]

[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]

[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]

[    0.000000] PM: Registered nosave memory: [mem 0xcfd81000-0xcfddffff]

[    0.000000] PM: Registered nosave memory: [mem 0xcfde0000-0xcfde2fff]

[    0.000000] PM: Registered nosave memory: [mem 0xcfde3000-0xcfdeffff]

[    0.000000] PM: Registered nosave memory: [mem 0xcfdf0000-0xcfdfffff]

[    0.000000] PM: Registered nosave memory: [mem 0xcfe00000-0xdfffffff]

[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]

[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]

[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xffffffff]

[    0.000000] e820: [mem 0xcfe00000-0xdfffffff] available for PCI devices

[    0.000000] Booting paravirtualized kernel on bare hardware

[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1

[    0.000000] PERCPU: Embedded 29 pages/cpu @ffff88022fc00000 s86336 r8192 d24256 u262144

[    0.000000] pcpu-alloc: s86336 r8192 d24256 u262144 alloc=1*2097152

[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 

[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 2063628

[    0.000000] Policy zone: Normal

[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-32-generic root=UUID=57dc3c09-fde8-4ccd-bfe5-a99cc87a67d7 ro quiet splash vt.handoff=7

[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)

[    0.000000] Checking aperture...

[    0.000000] No AGP bridge found

[    0.000000] Node 0: aperture @ 6924000000 size 32 MB

[    0.000000] Aperture beyond 4GB. Ignoring.

[    0.000000] Your BIOS doesn't leave a aperture memory hole

[    0.000000] Please enable the IOMMU option in the BIOS setup

[    0.000000] This costs you 64 MB of RAM

[    0.000000] Mapping aperture over 65536 KB of RAM @ c4000000

[    0.000000] PM: Registered nosave memory: [mem 0xc4000000-0xc7ffffff]

[    0.000000] Memory: 8086700K/8385632K available (7363K kernel code, 1142K rwdata, 3400K rodata, 1336K init, 1440K bss, 298932K reserved)

[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1

[    0.000000] Hierarchical RCU implementation.

[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.

[    0.000000] 	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.

[    0.000000] 	Offload RCU callbacks from all CPUs

[    0.000000] 	Offload RCU callbacks from CPUs: 0-7.

[    0.000000] NR_IRQS:16640 nr_irqs:744 16

[    0.000000] spurious 8259A interrupt: IRQ7.

[    0.000000] Console: colour dummy device 80x25

[    0.000000] console [tty0] enabled

[    0.000000] allocated 33554432 bytes of page_cgroup

[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups

[    0.000000] hpet clockevent registered

[    0.000000] tsc: Fast TSC calibration using PIT

[    0.004000] tsc: Detected 3415.253 MHz processor

[    0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 6830.50 BogoMIPS (lpj=13661012)

[    0.000006] pid_max: default: 32768 minimum: 301

[    0.000026] Security Framework initialized

[    0.000042] AppArmor: AppArmor initialized

[    0.000043] Yama: becoming mindful.

[    0.000488] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)

[    0.002525] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)

[    0.003470] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)

[    0.003478] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)

[    0.003692] Initializing cgroup subsys memory

[    0.003698] Initializing cgroup subsys devices

[    0.003699] Initializing cgroup subsys freezer

[    0.003701] Initializing cgroup subsys blkio

[    0.003702] Initializing cgroup subsys perf_event

[    0.003704] Initializing cgroup subsys hugetlb

[    0.003720] tseg: 00cfe00000

[    0.003722] CPU: Physical Processor ID: 0

[    0.003723] CPU: Processor Core ID: 0

[    0.003724] mce: CPU supports 6 MCE banks

[    0.003729] LVT offset 0 assigned for vector 0xf9

[    0.003732] process: using AMD E400 aware idle routine

[    0.003734] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8

[    0.003734] Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64

[    0.003734] tlb_flushall_shift: 4

[    0.003814] Freeing SMP alternatives memory: 32K (ffffffff81e6d000 - ffffffff81e75000)

[    0.004452] ACPI: Core revision 20131115

[    0.005970] ACPI: All ACPI Tables successfully acquired

[    0.022899] ftrace: allocating 28495 entries in 112 pages

[    0.032830] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1

[    0.072537] smpboot: CPU0: AMD Phenom(tm) II X4 965 Processor (fam: 10, model: 04, stepping: 03)

[    0.179260] Performance Events: AMD PMU driver.

[    0.179263] ... version:                0

[    0.179264] ... bit width:              48

[    0.179264] ... generic registers:      4

[    0.179265] ... value mask:             0000ffffffffffff

[    0.179266] ... max period:             00007fffffffffff

[    0.179267] ... fixed-purpose events:   0

[    0.179267] ... event mask:             000000000000000f

[    0.180529] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.

[    0.180588] x86: Booting SMP configuration:

[    0.193692] process: System has AMD C1E enabled

[    0.193712] process: Switch to broadcast mode on CPU1

[    0.206801] process: Switch to broadcast mode on CPU2

[    0.180590] .... node  #0, CPUs:      #1 #2 #3

[    0.219849] x86: Booted up 1 node, 4 CPUs

[    0.219851] smpboot: Total of 4 processors activated (27322.02 BogoMIPS)

[    0.219898] process: Switch to broadcast mode on CPU3

[    0.224233] process: Switch to broadcast mode on CPU0

[    0.224391] devtmpfs: initialized

[    0.227219] EVM: security.selinux

[    0.227220] EVM: security.SMACK64

[    0.227221] EVM: security.ima

[    0.227222] EVM: security.capability

[    0.227303] PM: Registering ACPI NVS region [mem 0xcfde0000-0xcfde2fff] (12288 bytes)

[    0.228064] pinctrl core: initialized pinctrl subsystem

[    0.228114] regulator-dummy: no parameters

[    0.228138] RTC time: 19:15:21, date: 07/18/14

[    0.228169] NET: Registered protocol family 16

[    0.228249] cpuidle: using governor ladder

[    0.228251] cpuidle: using governor menu

[    0.228254] node 0 link 0: io port [9000, ffff]

[    0.228256] TOM: 00000000d0000000 aka 3328M

[    0.228258] Fam 10h mmconf [mem 0xe0000000-0xe00fffff]

[    0.228259] node 0 link 0: mmio [a0000, bffff]

[    0.228261] node 0 link 0: mmio [d0000000, dfffffff]

[    0.228263] node 0 link 0: mmio [f0000000, fe02ffff]

[    0.228264] node 0 link 0: mmio [e0000000, e06fffff] ==> [e0100000, e06fffff]

[    0.228266] TOM2: 0000000230000000 aka 8960M

[    0.228267] bus: [bus 00-06] on node 0 link 0

[    0.228268] bus: 00 [io  0x0000-0xffff]

[    0.228269] bus: 00 [mem 0x000a0000-0x000bffff]

[    0.228270] bus: 00 [mem 0xd0000000-0xdfffffff]

[    0.228271] bus: 00 [mem 0xe0700000-0xffffffff]

[    0.228272] bus: 00 [mem 0xe0100000-0xe06fffff]

[    0.228272] bus: 00 [mem 0x230000000-0xfcffffffff]

[    0.228329] ACPI: bus type PCI registered

[    0.228331] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5

[    0.228375] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)

[    0.228377] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820

[    0.235193] PCI: Using configuration type 1 for base access

[    0.235965] bio: create slab <bio-0> at 0

[    0.236103] ACPI: Added _OSI(Module Device)

[    0.236104] ACPI: Added _OSI(Processor Device)

[    0.236105] ACPI: Added _OSI(3.0 _SCP Extensions)

[    0.236106] ACPI: Added _OSI(Processor Aggregator Device)

[    0.240304] ACPI: Interpreter enabled

[    0.240313] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)

[    0.240316] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)

[    0.240326] ACPI: (supports S0 S3 S4 S5)

[    0.240327] ACPI: Using IOAPIC for interrupt routing

[    0.240382] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug

[    0.240449] ACPI: No dock devices found.

[    0.279910] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])

[    0.279915] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]

[    0.279919] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM

[    0.280100] PCI host bridge to bus 0000:00

[    0.280102] pci_bus 0000:00: root bus resource [bus 00-ff]

[    0.280104] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]

[    0.280105] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]

[    0.280107] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]

[    0.280108] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]

[    0.280109] pci_bus 0000:00: root bus resource [mem 0xcff00000-0xfebfffff]

[    0.280117] pci 0000:00:00.0: [1002:5957] type 00 class 0x060000

[    0.280127] pci 0000:00:00.0: reg 0x1c: [mem 0xe0000000-0xffffffff 64bit]

[    0.280195] pci 0000:00:02.0: [1002:5978] type 01 class 0x060400

[    0.280221] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold

[    0.280255] pci 0000:00:02.0: System wakeup disabled by ACPI

[    0.280278] pci 0000:00:06.0: [1002:597c] type 01 class 0x060400

[    0.280303] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold

[    0.280334] pci 0000:00:06.0: System wakeup disabled by ACPI

[    0.280353] pci 0000:00:07.0: [1002:597d] type 01 class 0x060400

[    0.280378] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold

[    0.280409] pci 0000:00:07.0: System wakeup disabled by ACPI

[    0.280429] pci 0000:00:09.0: [1002:597e] type 01 class 0x060400

[    0.280454] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold

[    0.280484] pci 0000:00:09.0: System wakeup disabled by ACPI

[    0.280504] pci 0000:00:0a.0: [1002:597f] type 01 class 0x060400

[    0.280529] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold

[    0.280560] pci 0000:00:0a.0: System wakeup disabled by ACPI

[    0.280592] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601

[    0.280610] pci 0000:00:11.0: reg 0x10: [io  0xff00-0xff07]

[    0.280619] pci 0000:00:11.0: reg 0x14: [io  0xfe00-0xfe03]

[    0.280627] pci 0000:00:11.0: reg 0x18: [io  0xfd00-0xfd07]

[    0.280636] pci 0000:00:11.0: reg 0x1c: [io  0xfc00-0xfc03]

[    0.280644] pci 0000:00:11.0: reg 0x20: [io  0xfb00-0xfb0f]

[    0.280653] pci 0000:00:11.0: reg 0x24: [mem 0xfe02f000-0xfe02f3ff]

[    0.280743] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310

[    0.280755] pci 0000:00:12.0: reg 0x10: [mem 0xfe02e000-0xfe02efff]

[    0.280834] pci 0000:00:12.0: System wakeup disabled by ACPI

[    0.280854] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310

[    0.280866] pci 0000:00:12.1: reg 0x10: [mem 0xfe02d000-0xfe02dfff]

[    0.280945] pci 0000:00:12.1: System wakeup disabled by ACPI

[    0.280969] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320

[    0.280987] pci 0000:00:12.2: reg 0x10: [mem 0xfe02c000-0xfe02c0ff]

[    0.281064] pci 0000:00:12.2: supports D1 D2

[    0.281065] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot

[    0.281100] pci 0000:00:12.2: System wakeup disabled by ACPI

[    0.281125] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310

[    0.281137] pci 0000:00:13.0: reg 0x10: [mem 0xfe02b000-0xfe02bfff]

[    0.281216] pci 0000:00:13.0: System wakeup disabled by ACPI

[    0.281237] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310

[    0.281249] pci 0000:00:13.1: reg 0x10: [mem 0xfe02a000-0xfe02afff]

[    0.281328] pci 0000:00:13.1: System wakeup disabled by ACPI

[    0.281353] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320

[    0.281371] pci 0000:00:13.2: reg 0x10: [mem 0xfe029000-0xfe0290ff]

[    0.281448] pci 0000:00:13.2: supports D1 D2

[    0.281449] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot

[    0.281484] pci 0000:00:13.2: System wakeup disabled by ACPI

[    0.281513] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500

[    0.281639] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a

[    0.281655] pci 0000:00:14.1: reg 0x10: [io  0x0000-0x0007]

[    0.281663] pci 0000:00:14.1: reg 0x14: [io  0x0000-0x0003]

[    0.281671] pci 0000:00:14.1: reg 0x18: [io  0x0000-0x0007]

[    0.281680] pci 0000:00:14.1: reg 0x1c: [io  0x0000-0x0003]

[    0.281688] pci 0000:00:14.1: reg 0x20: [io  0xfa00-0xfa0f]

[    0.281794] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300

[    0.281814] pci 0000:00:14.2: reg 0x10: [mem 0xfe024000-0xfe027fff 64bit]

[    0.281875] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold

[    0.281908] pci 0000:00:14.2: System wakeup disabled by ACPI

[    0.281929] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100

[    0.282035] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401

[    0.282093] pci 0000:00:14.4: System wakeup disabled by ACPI

[    0.282113] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310

[    0.282125] pci 0000:00:14.5: reg 0x10: [mem 0xfe028000-0xfe028fff]

[    0.282204] pci 0000:00:14.5: System wakeup disabled by ACPI

[    0.282228] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000

[    0.282273] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000

[    0.282316] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000

[    0.282360] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000

[    0.282405] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000

[    0.282486] pci 0000:01:00.0: [1002:6798] type 00 class 0x030000

[    0.282496] pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref]

[    0.282503] pci 0000:01:00.0: reg 0x18: [mem 0xfdf80000-0xfdfbffff 64bit]

[    0.282508] pci 0000:01:00.0: reg 0x20: [io  0xae00-0xaeff]

[    0.282517] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]

[    0.282545] pci 0000:01:00.0: supports D1 D2

[    0.282546] pci 0000:01:00.0: PME# supported from D1 D2 D3hot

[    0.282580] pci 0000:01:00.1: [1002:aaa0] type 00 class 0x040300

[    0.282589] pci 0000:01:00.1: reg 0x10: [mem 0xfdffc000-0xfdffffff 64bit]

[    0.282635] pci 0000:01:00.1: supports D1 D2

[    0.289838] pci 0000:00:02.0: PCI bridge to [bus 01]

[    0.289843] pci 0000:00:02.0:   bridge window [io  0xa000-0xafff]

[    0.289845] pci 0000:00:02.0:   bridge window [mem 0xfdf00000-0xfdffffff]

[    0.289847] pci 0000:00:02.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]

[    0.289893] pci 0000:02:00.0: [197b:2363] type 00 class 0x010601

[    0.289956] pci 0000:02:00.0: reg 0x24: [mem 0xfdefe000-0xfdefffff]

[    0.290002] pci 0000:02:00.0: PME# supported from D3hot

[    0.290043] pci 0000:02:00.1: [197b:2363] type 00 class 0x010185

[    0.290058] pci 0000:02:00.1: reg 0x10: [io  0xef00-0xef07]

[    0.290065] pci 0000:02:00.1: reg 0x14: [io  0xee00-0xee03]

[    0.290072] pci 0000:02:00.1: reg 0x18: [io  0xed00-0xed07]

[    0.290079] pci 0000:02:00.1: reg 0x1c: [io  0xec00-0xec03]

[    0.290086] pci 0000:02:00.1: reg 0x20: [io  0xeb00-0xeb0f]

[    0.290153] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'

[    0.290159] pci 0000:00:06.0: PCI bridge to [bus 02]

[    0.290162] pci 0000:00:06.0:   bridge window [io  0xe000-0xefff]

[    0.290164] pci 0000:00:06.0:   bridge window [mem 0xfde00000-0xfdefffff]

[    0.290166] pci 0000:00:06.0:   bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]

[    0.290206] pci 0000:03:00.0: [1b4b:9128] type 00 class 0x010601

[    0.290219] pci 0000:03:00.0: reg 0x10: [io  0xdf00-0xdf07]

[    0.290229] pci 0000:03:00.0: reg 0x14: [io  0xde00-0xde03]

[    0.290238] pci 0000:03:00.0: reg 0x18: [io  0xdd00-0xdd07]

[    0.290248] pci 0000:03:00.0: reg 0x1c: [io  0xdc00-0xdc03]

[    0.290257] pci 0000:03:00.0: reg 0x20: [io  0xdb00-0xdb0f]

[    0.290267] pci 0000:03:00.0: reg 0x24: [mem 0xfdcff000-0xfdcff7ff]

[    0.290276] pci 0000:03:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]

[    0.290320] pci 0000:03:00.0: PME# supported from D3hot

[    0.297844] pci 0000:00:07.0: PCI bridge to [bus 03]

[    0.297848] pci 0000:00:07.0:   bridge window [io  0xd000-0xdfff]

[    0.297850] pci 0000:00:07.0:   bridge window [mem 0xfdc00000-0xfdcfffff]

[    0.297853] pci 0000:00:07.0:   bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref]

[    0.297899] pci 0000:04:00.0: [1033:0194] type 00 class 0x0c0330

[    0.297913] pci 0000:04:00.0: reg 0x10: [mem 0xfdafe000-0xfdafffff 64bit]

[    0.297978] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold

[    0.305847] pci 0000:00:09.0: PCI bridge to [bus 04]

[    0.305851] pci 0000:00:09.0:   bridge window [io  0xc000-0xcfff]

[    0.305853] pci 0000:00:09.0:   bridge window [mem 0xfda00000-0xfdafffff]

[    0.305856] pci 0000:00:09.0:   bridge window [mem 0xfd900000-0xfd9fffff 64bit pref]

[    0.305899] pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000

[    0.305911] pci 0000:05:00.0: reg 0x10: [io  0xbe00-0xbeff]

[    0.305929] pci 0000:05:00.0: reg 0x18: [mem 0xfd6ff000-0xfd6fffff 64bit pref]

[    0.305941] pci 0000:05:00.0: reg 0x20: [mem 0xfd6f8000-0xfd6fbfff 64bit pref]

[    0.305949] pci 0000:05:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]

[    0.305992] pci 0000:05:00.0: supports D1 D2

[    0.305994] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold

[    0.313852] pci 0000:00:0a.0: PCI bridge to [bus 05]

[    0.313856] pci 0000:00:0a.0:   bridge window [io  0xb000-0xbfff]

[    0.313858] pci 0000:00:0a.0:   bridge window [mem 0xfd800000-0xfd8fffff]

[    0.313860] pci 0000:00:0a.0:   bridge window [mem 0xfd600000-0xfd6fffff 64bit pref]

[    0.313913] pci 0000:06:08.0: [14f1:8800] type 00 class 0x040000

[    0.313936] pci 0000:06:08.0: reg 0x10: [mem 0xfa000000-0xfaffffff]

[    0.314072] pci 0000:06:08.1: [14f1:8811] type 00 class 0x048000

[    0.314095] pci 0000:06:08.1: reg 0x10: [mem 0xfb000000-0xfbffffff]

[    0.314234] pci 0000:06:09.0: [1814:0601] type 00 class 0x028000

[    0.314254] pci 0000:06:09.0: reg 0x10: [mem 0xfcfe0000-0xfcfeffff]

[    0.314382] pci 0000:06:0e.0: [104c:8024] type 00 class 0x0c0010

[    0.314403] pci 0000:06:0e.0: reg 0x10: [mem 0xfcfff000-0xfcfff7ff]

[    0.314415] pci 0000:06:0e.0: reg 0x14: [mem 0xfcff8000-0xfcffbfff]

[    0.314502] pci 0000:06:0e.0: supports D1 D2

[    0.314503] pci 0000:06:0e.0: PME# supported from D0 D1 D2 D3hot

[    0.314552] pci 0000:00:14.4: PCI bridge to [bus 06] (subtractive decode)

[    0.314555] pci 0000:00:14.4:   bridge window [io  0x9000-0x9fff]

[    0.314559] pci 0000:00:14.4:   bridge window [mem 0xfa000000-0xfcffffff]

[    0.314562] pci 0000:00:14.4:   bridge window [mem 0xfd700000-0xfd7fffff pref]

[    0.314563] pci 0000:00:14.4:   bridge window [io  0x0000-0x0cf7] (subtractive decode)

[    0.314565] pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff] (subtractive decode)

[    0.314566] pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)

[    0.314567] pci 0000:00:14.4:   bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)

[    0.314569] pci 0000:00:14.4:   bridge window [mem 0xcff00000-0xfebfffff] (subtractive decode)

[    0.329910] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.

[    0.329945] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.

[    0.329977] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.

[    0.330007] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.

[    0.330037] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.

[    0.330066] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.

[    0.330096] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.

[    0.330125] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.

[    0.330489] ACPI: \_SB_.PCI0: notify handler is installed

[    0.330510] Found 1 acpi root devices

[    0.330604] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none

[    0.330606] vgaarb: loaded

[    0.330607] vgaarb: bridge control possible 0000:01:00.0

[    0.330737] SCSI subsystem initialized

[    0.330805] libata version 3.00 loaded.

[    0.330820] ACPI: bus type USB registered

[    0.330833] usbcore: registered new interface driver usbfs

[    0.330838] usbcore: registered new interface driver hub

[    0.330859] usbcore: registered new device driver usb

[    0.330949] PCI: Using ACPI for IRQ routing

[    0.339102] PCI: pci_cache_line_size set to 64 bytes

[    0.339108] pci 0000:00:00.0: no compatible bridge window for [mem 0xe0000000-0xffffffff 64bit]

[    0.339175] e820: reserve RAM buffer [mem 0x00098000-0x0009ffff]

[    0.339177] e820: reserve RAM buffer [mem 0xcfd81000-0xcfffffff]

[    0.339239] NetLabel: Initializing

[    0.339240] NetLabel:  domain hash size = 128

[    0.339241] NetLabel:  protocols = UNLABELED CIPSOv4

[    0.339249] NetLabel:  unlabeled traffic allowed by default

[    0.339313] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0

[    0.339316] hpet0: 4 comparators, 32-bit 14.318180 MHz counter

[    0.341383] Switched to clocksource hpet

[    0.344843] AppArmor: AppArmor Filesystem Enabled

[    0.344858] pnp: PnP ACPI init

[    0.344866] ACPI: bus type PNP registered

[    0.344930] system 00:00: [io  0x04d0-0x04d1] has been reserved

[    0.344932] system 00:00: [io  0x0220-0x0225] has been reserved

[    0.344934] system 00:00: [io  0x0290-0x0294] has been reserved

[    0.344937] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)

[    0.361533] pnp 00:01: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]

[    0.361550] pnp 00:01: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]

[    0.361558] pnp 00:01: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:03:00.0 BAR 6 [mem 0x00000000-0x0000ffff pref]

[    0.361561] pnp 00:01: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:05:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]

[    0.361584] system 00:01: [io  0x4100-0x411f] has been reserved

[    0.361586] system 00:01: [io  0x0228-0x022f] has been reserved

[    0.361588] system 00:01: [io  0x040b] has been reserved

[    0.361589] system 00:01: [io  0x04d6] has been reserved

[    0.361591] system 00:01: [io  0x0c00-0x0c01] has been reserved

[    0.361592] system 00:01: [io  0x0c14] has been reserved

[    0.361593] system 00:01: [io  0x0c50-0x0c52] has been reserved

[    0.361595] system 00:01: [io  0x0c6c-0x0c6d] has been reserved

[    0.361596] system 00:01: [io  0x0c6f] has been reserved

[    0.361597] system 00:01: [io  0x0cd0-0x0cd1] has been reserved

[    0.361599] system 00:01: [io  0x0cd2-0x0cd3] has been reserved

[    0.361600] system 00:01: [io  0x0cd4-0x0cdf] has been reserved

[    0.361602] system 00:01: [io  0x4000-0x40fe] could not be reserved

[    0.361603] system 00:01: [io  0x4210-0x4217] has been reserved

[    0.361605] system 00:01: [io  0x0b00-0x0b0f] has been reserved

[    0.361606] system 00:01: [io  0x0b10-0x0b1f] has been reserved

[    0.361608] system 00:01: [io  0x0b20-0x0b3f] has been reserved

[    0.361609] system 00:01: [mem 0xfee00400-0xfee00fff window] has been reserved

[    0.361611] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)

[    0.361678] pnp 00:02: [dma 4]

[    0.361690] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)

[    0.361732] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)

[    0.361759] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)

[    0.361774] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)

[    0.361795] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)

[    0.362015] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)

[    0.362170] pnp 00:08: Plug and Play ACPI device, IDs PNP0400 (active)

[    0.362264] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved

[    0.362266] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)

[    0.362349] pnp 00:0a: disabling [mem 0x000d7400-0x000d7fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]

[    0.362351] pnp 00:0a: disabling [mem 0x000f0000-0x000f7fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]

[    0.362353] pnp 00:0a: disabling [mem 0x000f8000-0x000fbfff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]

[    0.362354] pnp 00:0a: disabling [mem 0x000fc000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]

[    0.362356] pnp 00:0a: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]

[    0.362358] pnp 00:0a: disabling [mem 0x00100000-0xcfddffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]

[    0.362390] system 00:0a: [mem 0xcfde0000-0xcfdeffff] could not be reserved

[    0.362392] system 00:0a: [mem 0xffff0000-0xffffffff] has been reserved

[    0.362394] system 00:0a: [mem 0xcfdf0000-0xcfdfffff] has been reserved

[    0.362395] system 00:0a: [mem 0xcfe00000-0xcfefffff] could not be reserved

[    0.362397] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved

[    0.362398] system 00:0a: [mem 0xfee00000-0xfee00fff] could not be reserved

[    0.362400] system 00:0a: [mem 0xfff80000-0xfffeffff] has been reserved

[    0.362402] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)

[    0.362414] pnp: PnP ACPI: found 11 devices

[    0.362415] ACPI: bus type PNP unregistered

[    0.369003] pci 0000:01:00.0: BAR 6: assigned [mem 0xfdf00000-0xfdf1ffff pref]

[    0.369005] pci 0000:00:02.0: PCI bridge to [bus 01]

[    0.369007] pci 0000:00:02.0:   bridge window [io  0xa000-0xafff]

[    0.369009] pci 0000:00:02.0:   bridge window [mem 0xfdf00000-0xfdffffff]

[    0.369011] pci 0000:00:02.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]

[    0.369014] pci 0000:00:06.0: PCI bridge to [bus 02]

[    0.369016] pci 0000:00:06.0:   bridge window [io  0xe000-0xefff]

[    0.369018] pci 0000:00:06.0:   bridge window [mem 0xfde00000-0xfdefffff]

[    0.369020] pci 0000:00:06.0:   bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]

[    0.369022] pci 0000:03:00.0: BAR 6: assigned [mem 0xfdb00000-0xfdb0ffff pref]

[    0.369024] pci 0000:00:07.0: PCI bridge to [bus 03]

[    0.369025] pci 0000:00:07.0:   bridge window [io  0xd000-0xdfff]

[    0.369027] pci 0000:00:07.0:   bridge window [mem 0xfdc00000-0xfdcfffff]

[    0.369029] pci 0000:00:07.0:   bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref]

[    0.369032] pci 0000:00:09.0: PCI bridge to [bus 04]

[    0.369033] pci 0000:00:09.0:   bridge window [io  0xc000-0xcfff]

[    0.369035] pci 0000:00:09.0:   bridge window [mem 0xfda00000-0xfdafffff]

[    0.369037] pci 0000:00:09.0:   bridge window [mem 0xfd900000-0xfd9fffff 64bit pref]

[    0.369040] pci 0000:05:00.0: BAR 6: assigned [mem 0xfd600000-0xfd61ffff pref]

[    0.369041] pci 0000:00:0a.0: PCI bridge to [bus 05]

[    0.369043] pci 0000:00:0a.0:   bridge window [io  0xb000-0xbfff]

[    0.369045] pci 0000:00:0a.0:   bridge window [mem 0xfd800000-0xfd8fffff]

[    0.369046] pci 0000:00:0a.0:   bridge window [mem 0xfd600000-0xfd6fffff 64bit pref]

[    0.369049] pci 0000:00:14.4: PCI bridge to [bus 06]

[    0.369051] pci 0000:00:14.4:   bridge window [io  0x9000-0x9fff]

[    0.369056] pci 0000:00:14.4:   bridge window [mem 0xfa000000-0xfcffffff]

[    0.369059] pci 0000:00:14.4:   bridge window [mem 0xfd700000-0xfd7fffff pref]

[    0.369064] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]

[    0.369066] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]

[    0.369067] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]

[    0.369068] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]

[    0.369070] pci_bus 0000:00: resource 8 [mem 0xcff00000-0xfebfffff]

[    0.369071] pci_bus 0000:01: resource 0 [io  0xa000-0xafff]

[    0.369072] pci_bus 0000:01: resource 1 [mem 0xfdf00000-0xfdffffff]

[    0.369074] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]

[    0.369075] pci_bus 0000:02: resource 0 [io  0xe000-0xefff]

[    0.369076] pci_bus 0000:02: resource 1 [mem 0xfde00000-0xfdefffff]

[    0.369078] pci_bus 0000:02: resource 2 [mem 0xfdd00000-0xfddfffff 64bit pref]

[    0.369079] pci_bus 0000:03: resource 0 [io  0xd000-0xdfff]

[    0.369080] pci_bus 0000:03: resource 1 [mem 0xfdc00000-0xfdcfffff]

[    0.369082] pci_bus 0000:03: resource 2 [mem 0xfdb00000-0xfdbfffff 64bit pref]

[    0.369083] pci_bus 0000:04: resource 0 [io  0xc000-0xcfff]

[    0.369084] pci_bus 0000:04: resource 1 [mem 0xfda00000-0xfdafffff]

[    0.369086] pci_bus 0000:04: resource 2 [mem 0xfd900000-0xfd9fffff 64bit pref]

[    0.369087] pci_bus 0000:05: resource 0 [io  0xb000-0xbfff]

[    0.369088] pci_bus 0000:05: resource 1 [mem 0xfd800000-0xfd8fffff]

[    0.369090] pci_bus 0000:05: resource 2 [mem 0xfd600000-0xfd6fffff 64bit pref]

[    0.369091] pci_bus 0000:06: resource 0 [io  0x9000-0x9fff]

[    0.369092] pci_bus 0000:06: resource 1 [mem 0xfa000000-0xfcffffff]

[    0.369094] pci_bus 0000:06: resource 2 [mem 0xfd700000-0xfd7fffff pref]

[    0.369095] pci_bus 0000:06: resource 4 [io  0x0000-0x0cf7]

[    0.369096] pci_bus 0000:06: resource 5 [io  0x0d00-0xffff]

[    0.369097] pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff]

[    0.369099] pci_bus 0000:06: resource 7 [mem 0x000c0000-0x000dffff]

[    0.369100] pci_bus 0000:06: resource 8 [mem 0xcff00000-0xfebfffff]

[    0.369126] NET: Registered protocol family 2

[    0.369260] TCP established hash table entries: 65536 (order: 7, 524288 bytes)

[    0.369447] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)

[    0.369684] TCP: Hash tables configured (established 65536 bind 65536)

[    0.369717] TCP: reno registered

[    0.369725] UDP hash table entries: 4096 (order: 5, 131072 bytes)

[    0.369767] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)

[    0.369855] NET: Registered protocol family 1

[    1.337970] pci 0000:00:13.0: OHCI: BIOS handoff failed (BIOS bug?) 00000184

[    1.562261] pci 0000:01:00.0: Boot video device

[    1.562393] PCI: CLS 64 bytes, default 64

[    1.562449] Trying to unpack rootfs image as initramfs...

[    1.795541] Freeing initrd memory: 18708K (ffff880035b66000 - ffff880036dab000)

[    1.795859] PCI-DMA: Disabling AGP.

[    1.795942] PCI-DMA: aperture base @ c4000000 size 65536 KB

[    1.795943] PCI-DMA: using GART IOMMU.

[    1.795945] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture

[    1.799158] LVT offset 1 assigned for vector 0x400

[    1.799167] IBS: LVT offset 1 assigned

[    1.799190] perf: AMD IBS detected (0x0000001f)

[    1.799224] microcode: CPU0: patch_level=0x010000b6

[    1.799231] microcode: CPU1: patch_level=0x010000b6

[    1.799242] microcode: CPU2: patch_level=0x010000b6

[    1.799251] microcode: CPU3: patch_level=0x010000b6

[    1.799312] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba

[    1.799313] Scanning for low memory corruption every 60 seconds

[    1.799501] Initialise system trusted keyring

[    1.799537] audit: initializing netlink socket (disabled)

[    1.799547] type=2000 audit(1405710922.680:1): initialized

[    1.819021] HugeTLB registered 2 MB page size, pre-allocated 0 pages

[    1.820084] zbud: loaded

[    1.820209] VFS: Disk quotas dquot_6.5.2

[    1.820242] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)

[    1.820611] fuse init (API version 7.22)

[    1.820671] msgmni has been set to 15959

[    1.820713] Key type big_key registered

[    1.821322] Key type asymmetric registered

[    1.821325] Asymmetric key parser 'x509' registered

[    1.821366] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)

[    1.821424] io scheduler noop registered

[    1.821425] io scheduler deadline registered (default)

[    1.821444] io scheduler cfq registered

[    1.821627] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X

[    1.821726] pcieport 0000:00:06.0: irq 41 for MSI/MSI-X

[    1.821815] pcieport 0000:00:07.0: irq 42 for MSI/MSI-X

[    1.821847] pcieport 0000:00:09.0: irq 43 for MSI/MSI-X

[    1.821936] pcieport 0000:00:0a.0: irq 44 for MSI/MSI-X

[    1.821974] pci_hotplug: PCI Hot Plug PCI Core version: 0.5

[    1.821984] pciehp: PCI Express Hot Plug Controller Driver version: 0.4

[    1.822010] vesafb: mode is 1920x1080x32, linelength=7680, pages=0

[    1.822012] vesafb: scrolling: redraw

[    1.822013] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0

[    1.822256] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90010e80000, using 8128k, total 8128k

[    1.843324] Console: switching to colour frame buffer device 240x67

[    1.864227] fb0: VESA VGA frame buffer device

[    1.864242] ipmi message handler version 39.2

[    1.864283] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0

[    1.864286] ACPI: Power Button [PWRB]

[    1.864310] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1

[    1.864311] ACPI: Power Button [PWRF]

[    1.864331] ACPI: processor limited to max C-state 1

[    1.864426] GHES: HEST is not enabled!

[    1.864511] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled

[    1.884977] 00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A

[    1.886291] Linux agpgart interface v0.103

[    1.887332] brd: module loaded

[    1.887915] loop: module loaded

[    1.888184] libphy: Fixed MDIO Bus: probed

[    1.888241] tun: Universal TUN/TAP device driver, 1.6

[    1.888242] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>

[    1.888278] PPP generic driver version 2.4.2

[    1.888314] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

[    1.888317] ehci-pci: EHCI PCI platform driver

[    1.888423] ehci-pci 0000:00:12.2: EHCI Host Controller

[    1.888427] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1

[    1.888432] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround

[    1.888442] ehci-pci 0000:00:12.2: debug port 1

[    1.888486] ehci-pci 0000:00:12.2: irq 17, io mem 0xfe02c000

[    1.898271] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00

[    1.898309] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002

[    1.898311] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[    1.898312] usb usb1: Product: EHCI Host Controller

[    1.898313] usb usb1: Manufacturer: Linux 3.13.0-32-generic ehci_hcd

[    1.898314] usb usb1: SerialNumber: 0000:00:12.2

[    1.898402] hub 1-0:1.0: USB hub found

[    1.898407] hub 1-0:1.0: 6 ports detected

[    1.898580] ehci-pci 0000:00:13.2: EHCI Host Controller

[    1.898584] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2

[    1.898587] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround

[    1.898597] ehci-pci 0000:00:13.2: debug port 1

[    1.898636] ehci-pci 0000:00:13.2: irq 19, io mem 0xfe029000

[    1.910269] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00

[    1.910301] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002

[    1.910302] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[    1.910304] usb usb2: Product: EHCI Host Controller

[    1.910305] usb usb2: Manufacturer: Linux 3.13.0-32-generic ehci_hcd

[    1.910306] usb usb2: SerialNumber: 0000:00:13.2

[    1.910395] hub 2-0:1.0: USB hub found

[    1.910401] hub 2-0:1.0: 6 ports detected

[    1.910487] ehci-platform: EHCI generic platform driver

[    1.910492] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver

[    1.910493] ohci-pci: OHCI PCI platform driver

[    1.910580] ohci-pci 0000:00:12.0: OHCI PCI host controller

[    1.910584] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3

[    1.910609] ohci-pci 0000:00:12.0: irq 16, io mem 0xfe02e000

[    1.970303] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001

[    1.970306] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[    1.970307] usb usb3: Product: OHCI PCI host controller

[    1.970308] usb usb3: Manufacturer: Linux 3.13.0-32-generic ohci_hcd

[    1.970309] usb usb3: SerialNumber: 0000:00:12.0

[    1.970410] hub 3-0:1.0: USB hub found

[    1.970417] hub 3-0:1.0: 3 ports detected

[    1.970560] ohci-pci 0000:00:12.1: OHCI PCI host controller

[    1.970564] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4

[    1.970575] ohci-pci 0000:00:12.1: irq 16, io mem 0xfe02d000

[    2.030332] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001

[    2.030334] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[    2.030335] usb usb4: Product: OHCI PCI host controller

[    2.030336] usb usb4: Manufacturer: Linux 3.13.0-32-generic ohci_hcd

[    2.030337] usb usb4: SerialNumber: 0000:00:12.1

[    2.030443] hub 4-0:1.0: USB hub found

[    2.030450] hub 4-0:1.0: 3 ports detected

[    2.030593] ohci-pci 0000:00:13.0: OHCI PCI host controller

[    2.030597] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5

[    2.030621] ohci-pci 0000:00:13.0: irq 18, io mem 0xfe02b000

[    2.090362] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001

[    2.090365] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[    2.090366] usb usb5: Product: OHCI PCI host controller

[    2.090367] usb usb5: Manufacturer: Linux 3.13.0-32-generic ohci_hcd

[    2.090368] usb usb5: SerialNumber: 0000:00:13.0

[    2.090465] hub 5-0:1.0: USB hub found

[    2.090471] hub 5-0:1.0: 3 ports detected

[    2.090613] ohci-pci 0000:00:13.1: OHCI PCI host controller

[    2.090616] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6

[    2.090628] ohci-pci 0000:00:13.1: irq 18, io mem 0xfe02a000

[    2.150394] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001

[    2.150396] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[    2.150397] usb usb6: Product: OHCI PCI host controller

[    2.150398] usb usb6: Manufacturer: Linux 3.13.0-32-generic ohci_hcd

[    2.150399] usb usb6: SerialNumber: 0000:00:13.1

[    2.150495] hub 6-0:1.0: USB hub found

[    2.150502] hub 6-0:1.0: 3 ports detected

[    2.150644] ohci-pci 0000:00:14.5: OHCI PCI host controller

[    2.150648] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7

[    2.150659] ohci-pci 0000:00:14.5: irq 18, io mem 0xfe028000

[    2.210411] usb 1-5: new high-speed USB device number 2 using ehci-pci

[    2.210428] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001

[    2.210431] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[    2.210432] usb usb7: Product: OHCI PCI host controller

[    2.210433] usb usb7: Manufacturer: Linux 3.13.0-32-generic ohci_hcd

[    2.210434] usb usb7: SerialNumber: 0000:00:14.5

[    2.210522] hub 7-0:1.0: USB hub found

[    2.210529] hub 7-0:1.0: 2 ports detected

[    2.210585] ohci-platform: OHCI generic platform driver

[    2.210590] uhci_hcd: USB Universal Host Controller Interface driver

[    2.210643] xhci_hcd 0000:04:00.0: xHCI Host Controller

[    2.210646] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 8

[    2.210768] xhci_hcd 0000:04:00.0: irq 45 for MSI/MSI-X

[    2.210773] xhci_hcd 0000:04:00.0: irq 46 for MSI/MSI-X

[    2.210778] xhci_hcd 0000:04:00.0: irq 47 for MSI/MSI-X

[    2.210783] xhci_hcd 0000:04:00.0: irq 48 for MSI/MSI-X

[    2.210790] xhci_hcd 0000:04:00.0: irq 49 for MSI/MSI-X

[    2.210864] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002

[    2.210866] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[    2.210867] usb usb8: Product: xHCI Host Controller

[    2.210868] usb usb8: Manufacturer: Linux 3.13.0-32-generic xhci_hcd

[    2.210869] usb usb8: SerialNumber: 0000:04:00.0

[    2.210936] hub 8-0:1.0: USB hub found

[    2.210943] hub 8-0:1.0: 2 ports detected

[    2.210989] xhci_hcd 0000:04:00.0: xHCI Host Controller

[    2.210991] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 9

[    2.214132] usb usb9: New USB device found, idVendor=1d6b, idProduct=0003

[    2.214133] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[    2.214134] usb usb9: Product: xHCI Host Controller

[    2.214136] usb usb9: Manufacturer: Linux 3.13.0-32-generic xhci_hcd

[    2.214137] usb usb9: SerialNumber: 0000:04:00.0

[    2.214226] hub 9-0:1.0: USB hub found

[    2.214236] hub 9-0:1.0: 2 ports detected

[    2.218484] i8042: PNP: No PS/2 controller found. Probing ports directly.

[    2.218888] serio: i8042 KBD port at 0x60,0x64 irq 1

[    2.218893] serio: i8042 AUX port at 0x60,0x64 irq 12

[    2.219004] mousedev: PS/2 mouse device common for all mice

[    2.219127] rtc_cmos 00:04: RTC can wake from S4

[    2.219228] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0

[    2.219268] rtc_cmos 00:04: alarms up to one month, 242 bytes nvram, hpet irqs

[    2.219314] device-mapper: uevent: version 1.0.3

[    2.219361] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: [email protected]

[    2.219367] ledtrig-cpu: registered to indicate activity on CPUs

[    2.219441] TCP: cubic registered

[    2.219502] NET: Registered protocol family 10

[    2.219630] NET: Registered protocol family 17

[    2.219637] Key type dns_resolver registered

[    2.219866] Loading compiled-in X.509 certificates

[    2.220667] Loaded X.509 cert 'Magrathea: Glacier signing key: 5e3c0f9ca6e36543535fa2bb5b709e84f16da7c7'

[    2.220674] registered taskstats version 1

[    2.222775] Key type trusted registered

[    2.224301] Key type encrypted registered

[    2.225847] AppArmor: AppArmor sha1 policy hashing enabled

[    2.225850] IMA: No TPM chip found, activating TPM-bypass!

[    2.226141] regulator-dummy: disabling

[    2.226205]   Magic number: 6:95:294

[    2.226217] misc hpet: hash matches

[    2.226229] tty tty27: hash matches

[    2.226294] rtc_cmos 00:04: setting system clock to 2014-07-18 19:15:23 UTC (1405710923)

[    2.226392] acpi-cpufreq: overriding BIOS provided _PSD data

[    2.226475] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found

[    2.226476] EDD information not available.

[    2.226497] PM: Hibernation image not present or could not be loaded.

[    2.227639] Freeing unused kernel memory: 1336K (ffffffff81d1f000 - ffffffff81e6d000)

[    2.227640] Write protecting the kernel read-only data: 12288k

[    2.229441] Freeing unused kernel memory: 816K (ffff880001734000 - ffff880001800000)

[    2.230907] Freeing unused kernel memory: 696K (ffff880001b52000 - ffff880001c00000)

[    2.241392] systemd-udevd[122]: starting version 204

[    2.254680] pata_jmicron 0000:02:00.1: enabling device (0000 -> 0001)

[    2.255403] scsi0 : pata_jmicron

[    2.255487] scsi1 : pata_jmicron

[    2.255509] ata1: PATA max UDMA/100 cmd 0xef00 ctl 0xee00 bmdma 0xeb00 irq 19

[    2.255511] ata2: PATA max UDMA/100 cmd 0xed00 ctl 0xec00 bmdma 0xeb08 irq 19

[    2.256990] ahci 0000:00:11.0: version 3.0

[    2.257184] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode

[    2.257186] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc 

[    2.258359] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded

[    2.258369] r8169 0000:05:00.0: can't disable ASPM; OS doesn't have ASPM control

[    2.259567] r8169 0000:05:00.0: irq 50 for MSI/MSI-X

[    2.259684] r8169 0000:05:00.0 eth0: RTL8168d/8111d at 0xffffc90000c60000, 6c:f0:49:08:63:ee, XID 083000c0 IRQ 50

[    2.259686] r8169 0000:05:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]

[    2.260211] scsi2 : ahci

[    2.260297] scsi3 : ahci

[    2.260364] scsi4 : ahci

[    2.260573] scsi5 : ahci

[    2.262041] scsi6 : ahci

[    2.262093] scsi7 : ahci

[    2.262128] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22

[    2.262131] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22

[    2.262133] ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22

[    2.262136] ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22

[    2.262138] ata7: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f300 irq 22

[    2.262140] ata8: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f380 irq 22

[    2.262845] scsi8 : pata_atiixp

[    2.262919] scsi9 : pata_atiixp

[    2.262956] ata9: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14

[    2.262958] ata10: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15

[    2.274448] ahci 0000:02:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode

[    2.274452] ahci 0000:02:00.0: flags: 64bit ncq pm led clo pmp pio slum part 

[    2.274707] scsi10 : ahci

[    2.274792] scsi11 : ahci

[    2.274825] ata11: SATA max UDMA/133 abar m8192@0xfdefe000 port 0xfdefe100 irq 18

[    2.274828] ata12: SATA max UDMA/133 abar m8192@0xfdefe000 port 0xfdefe180 irq 18

[    2.274930] ahci 0000:03:00.0: irq 51 for MSI/MSI-X

[    2.290531] ahci 0000:03:00.0: AHCI 0001.0200 32 slots 8 ports 6 Gbps 0xff impl SATA mode

[    2.290534] ahci 0000:03:00.0: flags: 64bit ncq pio 

[    2.291283] scsi12 : ahci

[    2.291356] scsi13 : ahci

[    2.291418] scsi14 : ahci

[    2.291479] scsi15 : ahci

[    2.291541] scsi16 : ahci

[    2.291603] scsi17 : ahci

[    2.291665] scsi18 : ahci

[    2.291728] scsi19 : ahci

[    2.291758] ata13: SATA max UDMA/133 abar m2048@0xfdcff000 port 0xfdcff100 irq 51

[    2.291760] ata14: SATA max UDMA/133 abar m2048@0xfdcff000 port 0xfdcff180 irq 51

[    2.291763] ata15: SATA max UDMA/133 abar m2048@0xfdcff000 port 0xfdcff200 irq 51

[    2.291766] ata16: SATA max UDMA/133 abar m2048@0xfdcff000 port 0xfdcff280 irq 51

[    2.291768] ata17: SATA max UDMA/133 abar m2048@0xfdcff000 port 0xfdcff300 irq 51

[    2.291770] ata18: SATA max UDMA/133 abar m2048@0xfdcff000 port 0xfdcff380 irq 51

[    2.291772] ata19: SATA max UDMA/133 abar m2048@0xfdcff000 port 0xfdcff400 irq 51

[    2.291774] ata20: SATA max UDMA/133 abar m2048@0xfdcff000 port 0xfdcff480 irq 51

[    2.314523] firewire_ohci 0000:06:0e.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2

[    2.351048] usb 1-5: New USB device found, idVendor=1a40, idProduct=0101

[    2.351051] usb 1-5: New USB device strings: Mfr=0, Product=1, SerialNumber=0

[    2.351053] usb 1-5: Product: USB 2.0 Hub

[    2.351195] hub 1-5:1.0: USB hub found

[    2.351297] hub 1-5:1.0: 4 ports detected

[    2.462570] usb 2-3: new high-speed USB device number 2 using ehci-pci

[    2.582660] ata4: SATA link down (SStatus 0 SControl 300)

[    2.586656] ata5: SATA link down (SStatus 0 SControl 300)

[    2.586688] ata8: SATA link down (SStatus 0 SControl 300)

[    2.594600] ata12: SATA link down (SStatus 0 SControl 300)

[    2.598656] ata11: SATA link down (SStatus 0 SControl 300)

[    2.610651] ata20: SATA link up 1.5 Gbps (SStatus 113 SControl 300)

[    2.610681] ata18: SATA link down (SStatus 0 SControl 300)

[    2.610710] ata13: SATA link up 6.0 Gbps (SStatus 133 SControl 300)

[    2.610735] ata15: SATA link down (SStatus 0 SControl 300)

[    2.610761] ata19: SATA link down (SStatus 0 SControl 300)

[    2.614642] ata16: SATA link down (SStatus 0 SControl 300)

[    2.614671] ata17: SATA link down (SStatus 0 SControl 300)

[    2.717211] ata20.00: ATAPI: MARVELL VIRTUALL, 1.09, max UDMA/66

[    2.717324] ata20.00: configured for UDMA/66

[    2.726687] ata14: SATA link up 6.0 Gbps (SStatus 133 SControl 300)

[    2.726958] ata14.00: supports DRM functions and may not be fully accessible

[    2.729355] ata13.00: ATA-8: OCZ-AGILITY3, 2.22, max UDMA/133

[    2.729357] ata13.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA

[    2.729869] ata14.00: disabling queued TRIM support

[    2.729870] ata14.00: ATA-9: Crucial_CT480M500SSD1, MU03, max UDMA/133

[    2.729872] ata14.00: 937703088 sectors, multi 16: LBA48 NCQ (depth 31/32), AA

[    2.733475] ata14.00: supports DRM functions and may not be fully accessible

[    2.736422] ata14.00: disabling queued TRIM support

[    2.739234] ata13.00: configured for UDMA/133

[    2.739699] ata14.00: configured for UDMA/133

[    2.743838] usb 2-3: New USB device found, idVendor=048d, idProduct=1336

[    2.743840] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3

[    2.743841] usb 2-3: Product: Mass Storage Device

[    2.743843] usb 2-3: Manufacturer: Generic   

[    2.743844] usb 2-3: SerialNumber: 00000000000006

[    2.746219] usb-storage 2-3:1.0: USB Mass Storage device detected

[    2.746306] scsi20 : usb-storage 2-3:1.0

[    2.746345] usbcore: registered new interface driver usb-storage

[    2.754730] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)

[    2.755281] ata3.00: failed to enable AA (error_mask=0x1)

[    2.755284] ata3.00: ATA-8: VB0250EAVER, HPG7, max UDMA/100

[    2.755285] ata3.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32)

[    2.756022] ata3.00: failed to enable AA (error_mask=0x1)

[    2.756025] ata3.00: configured for UDMA/100

[    2.756197] scsi 2:0:0:0: Direct-Access     ATA      VB0250EAVER      HPG7 PQ: 0 ANSI: 5

[    2.756317] sd 2:0:0:0: Attached scsi generic sg0 type 0

[    2.756332] sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)

[    2.756442] sd 2:0:0:0: [sda] Write Protect is off

[    2.756444] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00

[    2.756461] sd 2:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA

[    2.758722] ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 300)

[    2.760435] ata7.00: ATAPI: HL-DT-ST BDDVDRW UH12NS30, 1.00, max UDMA/100

[    2.761163] ata7.00: configured for UDMA/100

[    2.762734] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)

[    2.764081] ata6.00: HPA detected: current 976764911, native 976773168

[    2.764084] ata6.00: ATA-8: ST3500820AS, SD45, max UDMA/133

[    2.764085] ata6.00: 976764911 sectors, multi 0: LBA48 NCQ (depth 31/32)

[    2.765855] ata6.00: configured for UDMA/133

[    2.765986] scsi 5:0:0:0: Direct-Access     ATA      ST3500820AS      SD45 PQ: 0 ANSI: 5

[    2.766094] sd 5:0:0:0: [sdb] 976764911 512-byte logical blocks: (500 GB/465 GiB)

[    2.766104] sd 5:0:0:0: Attached scsi generic sg1 type 0

[    2.766134] sd 5:0:0:0: [sdb] Write Protect is off

[    2.766136] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00

[    2.766168] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[    2.767485] scsi 6:0:0:0: CD-ROM            HL-DT-ST BDDVDRW UH12NS30 1.00 PQ: 0 ANSI: 5

[    2.767844]  sda: sda1

[    2.768144] sd 2:0:0:0: [sda] Attached SCSI disk

[    2.769983] sr0: scsi3-mmc drive: 1x/1x writer dvd-ram cd/rw xa/form2 cdda tray

[    2.769986] cdrom: Uniform CD-ROM driver Revision: 3.20

[    2.770080] sr 6:0:0:0: Attached scsi CD-ROM sr0

[    2.770131] sr 6:0:0:0: Attached scsi generic sg2 type 5

[    2.770415] scsi 12:0:0:0: Direct-Access     ATA      OCZ-AGILITY3     2.22 PQ: 0 ANSI: 5

[    2.770548] sd 12:0:0:0: [sdc] 234441648 512-byte logical blocks: (120 GB/111 GiB)

[    2.770596] sd 12:0:0:0: Attached scsi generic sg3 type 0

[    2.770729] sd 12:0:0:0: [sdc] Write Protect is off

[    2.770732] sd 12:0:0:0: [sdc] Mode Sense: 00 3a 00 00

[    2.770766] scsi 13:0:0:0: Direct-Access     ATA      Crucial_CT480M50 MU03 PQ: 0 ANSI: 5

[    2.770775] sd 12:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[    2.770844] sd 13:0:0:0: [sdd] 937703088 512-byte logical blocks: (480 GB/447 GiB)

[    2.770846] sd 13:0:0:0: [sdd] 4096-byte physical blocks

[    2.770873] sd 13:0:0:0: Attached scsi generic sg4 type 0

[    2.770983] sd 13:0:0:0: [sdd] Write Protect is off

[    2.770985] sd 13:0:0:0: [sdd] Mode Sense: 00 3a 00 00

[    2.771026] sd 13:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[    2.771083] scsi 19:0:0:0: Processor         Marvell  91xx Config      1.01 PQ: 0 ANSI: 5

[    2.771165] scsi 19:0:0:0: Attached scsi generic sg5 type 3

[    2.771225]  sdc: sdc2 sdc3

[    2.771387]  sdd: sdd1 sdd2

[    2.771553] sd 12:0:0:0: [sdc] Attached SCSI disk

[    2.771703] sd 13:0:0:0: [sdd] Attached SCSI disk

[    2.798692] tsc: Refined TSC clocksource calibration: 3415.106 MHz

[    2.814804] firewire_core 0000:06:0e.0: created device fw0: GUID 00314e1b006cf049, S400

[    2.837892]  sdb: sdb1 sdb2 sdb3 sdb4

[    2.838331] sd 5:0:0:0: [sdb] Attached SCSI disk

[    3.322971] usb 6-1: new low-speed USB device number 2 using ohci-pci

[    3.494141] usb 6-1: New USB device found, idVendor=06a3, idProduct=053c

[    3.494144] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0

[    3.494146] usb 6-1: Product: Saitek X45

[    3.494147] usb 6-1: Manufacturer: Saitek

[    3.515621] hidraw: raw HID events driver (C) Jiri Kosina

[    3.525300] usbcore: registered new interface driver usbhid

[    3.525302] usbhid: USB HID core driver

[    3.527162] input: Saitek Saitek X45 as /devices/pci0000:00/0000:00:13.1/usb6/6-1/6-1:1.0/input/input5

[    3.527243] hid-generic 0003:06A3:053C.0001: input,hidraw0: USB HID v1.00 Joystick [Saitek Saitek X45] on usb-0000:00:13.1-1/input0

[    3.743857] scsi 20:0:0:0: Direct-Access     Generic  Storage Device   0.00 PQ: 0 ANSI: 2

[    3.744043] sd 20:0:0:0: Attached scsi generic sg6 type 0

[    3.745353] sd 20:0:0:0: [sde] Attached SCSI removable disk

[    3.775235] usb 6-2: new full-speed USB device number 3 using ohci-pci

[    3.799319] Switched to clocksource tsc

[    4.154466] usb 6-2: New USB device found, idVendor=0a12, idProduct=0001

[    4.154468] usb 6-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0

[    4.154470] usb 6-2: Product: BT2.0

[    4.231485] usb 1-5.2: new full-speed USB device number 3 using ehci-pci

[    4.325392] usb 1-5.2: New USB device found, idVendor=e0ff, idProduct=0005

[    4.325395] usb 1-5.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0

[    4.325396] usb 1-5.2: Product: USB Device

[    4.325397] usb 1-5.2: Manufacturer: Areson

[    4.326657] input: Areson USB Device as /devices/pci0000:00/0000:00:12.2/usb1/1-5/1-5.2/1-5.2:1.0/input/input6

[    4.326744] hid-generic 0003:E0FF:0005.0002: input,hidraw1: USB HID v1.00 Mouse [Areson USB Device] on usb-0000:00:12.2-5.2/input0

[    4.329956] input: Areson USB Device as /devices/pci0000:00/0000:00:12.2/usb1/1-5/1-5.2/1-5.2:1.1/input/input7

[    4.330074] hid-generic 0003:E0FF:0005.0003: input,hiddev0,hidraw2: USB HID v1.00 Keyboard [Areson USB Device] on usb-0000:00:12.2-5.2/input1

[    4.403798] usb 1-5.3: new full-speed USB device number 4 using ehci-pci

[    4.498706] usb 1-5.3: New USB device found, idVendor=046d, idProduct=c22e

[    4.498708] usb 1-5.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0

[    4.498710] usb 1-5.3: Product: G510 Gaming Keyboard

[    4.498711] usb 1-5.3: Manufacturer: Logitech

[    4.504827] input: Logitech G510 Gaming Keyboard as /devices/pci0000:00/0000:00:12.2/usb1/1-5/1-5.3/1-5.3:1.0/input/input8

[    4.504895] hid-generic 0003:046D:C22E.0004: input,hidraw3: USB HID v1.11 Keyboard [Logitech G510 Gaming Keyboard] on usb-0000:00:12.2-5.3/input0

[    4.510380] input: Logitech G510 Gaming Keyboard as /devices/pci0000:00/0000:00:12.2/usb1/1-5/1-5.3/1-5.3:1.1/input/input9

[    4.510469] hid-generic 0003:046D:C22E.0005: input,hiddev0,hidraw4: USB HID v1.11 Device [Logitech G510 Gaming Keyboard] on usb-0000:00:12.2-5.3/input1

[    7.888938] random: nonblocking pool is initialized

[    7.890214] EXT4-fs (sdc3): INFO: recovery required on readonly filesystem

[    7.890215] EXT4-fs (sdc3): write access will be enabled during recovery

[    8.008005] EXT4-fs (sdc3): recovery complete

[    8.008470] EXT4-fs (sdc3): mounted filesystem with ordered data mode. Opts: (null)

[    8.089932] init: plymouth-upstart-bridge main process (228) terminated with status 1

[    8.089942] init: plymouth-upstart-bridge main process ended, respawning

[    8.094717] init: plymouth-upstart-bridge main process (238) terminated with status 1

[    8.094726] init: plymouth-upstart-bridge main process ended, respawning

[    8.098346] init: plymouth-upstart-bridge main process (241) terminated with status 1

[    8.098355] init: plymouth-upstart-bridge main process ended, respawning

[    8.098425] init: ureadahead main process (231) terminated with status 5

[    8.100627] init: plymouth-upstart-bridge main process (245) terminated with status 1

[    8.100635] init: plymouth-upstart-bridge main process ended, respawning

[    8.164667] Adding 10485756k swap on /dev/sdb4.  Priority:-1 extents:1 across:10485756k FS

[    8.190201] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready

[    8.225489] systemd-udevd[362]: starting version 204

[    8.266287] lp: driver loaded but no devices found

[    8.271649] ppdev: user-space parallel port driver

[    8.274297] parport_pc 00:08: reported by Plug and Play ACPI

[    8.274349] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]

[    8.291024] wmi: Mapper loaded

[    8.294527] AMD IOMMUv2 driver by Joerg Roedel <[email protected]>

[    8.294529] AMD IOMMUv2 functionality not available on this system

[    8.356447] ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \SOR1 1 (20131115/utaddress-251)

[    8.356454] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver

[    8.362809] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05

[    8.362889] sp5100_tco: PCI Revision ID: 0x3c

[    8.362907] sp5100_tco: failed to find MMIO address, giving up.

[    8.369675] lp0: using parport0 (interrupt-driven).

[    8.370145] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.

[    8.370148] Disabling lock debugging due to kernel taint

[    8.382364] type=1400 audit(1405707329.648:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=432 comm="apparmor_parser"

[    8.382371] type=1400 audit(1405707329.648:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=432 comm="apparmor_parser"

[    8.382375] type=1400 audit(1405707329.648:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=432 comm="apparmor_parser"

[    8.382690] hda-intel 0000:00:14.2: Using LPIB position fix

[    8.382753] type=1400 audit(1405707329.648:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=432 comm="apparmor_parser"

[    8.382757] type=1400 audit(1405707329.648:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=432 comm="apparmor_parser"

[    8.382946] type=1400 audit(1405707329.648:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=432 comm="apparmor_parser"

[    8.386356] Linux video capture interface: v2.00

[    8.387868] fglrx: module verification failed: signature and/or  required key missing - tainting kernel

[    8.388723] hda-intel 0000:00:14.2: Enable sync_write for stable communication

[    8.395507] <6>[fglrx] Maximum main memory to use for locked dma buffers: 7749 MBytes.

[    8.395715] <6>[fglrx]   vendor: 1002 device: 6798 count: 1

[    8.396065] <6>[fglrx] ioport: bar 4, base 0xae00, size: 0x100

[    8.396284] <6>[fglrx] Kernel PAT support is enabled

[    8.396301] <6>[fglrx] module loaded - fglrx 13.35.5 [Mar 12 2014] with 1 minors

[    8.405334] SKU: Nid=0x1d sku_cfg=0x4005e601

[    8.405337] SKU: port_connectivity=0x1

[    8.405338] SKU: enable_pcbeep=0x0

[    8.405338] SKU: check_sum=0x00000005

[    8.405339] SKU: customization=0x000000e6

[    8.405340] SKU: external_amp=0x0

[    8.405341] SKU: platform_type=0x0

[    8.405341] SKU: swap=0x0

[    8.405342] SKU: override=0x1

[    8.406022] autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line

[    8.406025]    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)

[    8.406026]    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)

[    8.406026]    mono: mono_out=0x0

[    8.406027]    dig-out=0x1e/0x0

[    8.406028]    inputs:

[    8.406029]      Rear Mic=0x18

[    8.406030]      Front Mic=0x19

[    8.406031]      Line=0x1a

[    8.406032]      CD=0x1c

[    8.406033]    dig-in=0x1f

[    8.406034] realtek: No valid SSID, checking pincfg 0x4005e601 for NID 0x1d

[    8.406034] realtek: Enabling init ASM_ID=0xe601 CODEC_ID=10ec0888

[    8.406417] cfg80211: Calling CRDA to update world regulatory domain

[    8.409411] MCE: In-kernel MCE decoding enabled.

[    8.412779] EDAC MC: Ver: 3.0.0

[    8.416904] AMD64 EDAC driver v3.4.0

[    8.426573] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input17

[    8.426620] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input16

[    8.426652] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input15

[    8.426684] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input14

[    8.426715] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input13

[    8.426746] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input12

[    8.426778] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input11

[    8.426810] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input10

[    8.427032] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client

[    8.427033] hda-intel 0000:01:00.1: Using LPIB position fix

[    8.427034] hda-intel 0000:01:00.1: Force to non-snoop mode

[    8.427068] snd_hda_intel 0000:01:00.1: irq 52 for MSI/MSI-X

[    8.427090] EDAC amd64: DRAM ECC disabled.

[    8.427097] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.

[    8.427097]  Either enable ECC checking or force module loading by setting 'ecc_enable_override'.

[    8.427097]  (Note that use of the override may cause unknown side effects.)

[    8.429534] hda-intel 0000:01:00.1: Enable sync_write for stable communication

[    8.431349] cx88[0]: subsystem: 0070:3401, board: Hauppauge WinTV 34xxx models [card=1,autodetected], frontend(s): 0

[    8.442254] input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input23

[    8.442326] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input22

[    8.442449] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input21

[    8.442489] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input20

[    8.442528] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input19

[    8.442571] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input18

[    8.461032] Bluetooth: Core ver 2.17

[    8.461051] NET: Registered protocol family 31

[    8.461052] Bluetooth: HCI device and connection manager initialized

[    8.461061] Bluetooth: HCI socket layer initialized

[    8.461063] Bluetooth: L2CAP socket layer initialized

[    8.461066] Bluetooth: SCO socket layer initialized

[    8.465850] usbcore: registered new interface driver btusb

[    8.498394] kvm: Nested Virtualization enabled

[    8.498399] kvm: Nested Paging enabled

[    8.501898] usbcore: registered new interface driver snd-usb-audio

[    8.576187] tuner 0-0061: Tuner -1 found with type(s) Radio TV.

[    8.621875] tveeprom 0-0050: Hauppauge model 34715, rev E124, serial# 7011228

[    8.621878] tveeprom 0-0050: tuner model is Philips FM1246 (idx 24, type 1)

[    8.621880] tveeprom 0-0050: TV standards PAL(I) (eeprom 0x10)

[    8.621882] tveeprom 0-0050: audio processor is CX881 (idx 31)

[    8.621882] tveeprom 0-0050: has radio

[    8.621884] cx88[0]: warning: unknown hauppauge model #34715

[    8.621884] cx88[0]: hauppauge eeprom: model=34715

[    8.626579] cfg80211: World regulatory domain updated:

[    8.626582] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)

[    8.626584] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)

[    8.626585] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)

[    8.626586] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)

[    8.626587] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)

[    8.626588] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)

[    8.630324] tuner-simple 0-0061: creating new instance

[    8.630327] tuner-simple 0-0061: type set to 1 (Philips PAL_I (FI1246 and compatibles))

[    8.661731] Registered IR keymap rc-hauppauge

[    8.661822] input: cx88 IR (Hauppauge WinTV 34xxx  as /devices/pci0000:00/0000:00:14.4/0000:06:08.0/rc/rc0/input24

[    8.661871] rc0: cx88 IR (Hauppauge WinTV 34xxx  as /devices/pci0000:00/0000:00:14.4/0000:06:08.0/rc/rc0

[    8.664117] IR RC5(x) protocol handler initialized

[    8.664138] IR JVC protocol handler initialized

[    8.664589] IR NEC protocol handler initialized

[    8.664738] IR RC6 protocol handler initialized

[    8.664973] cx88[0]/0: found at 0000:06:08.0, rev: 3, irq: 22, latency: 32, mmio: 0xfa000000

[    8.665898] IR Sony protocol handler initialized

[    8.666134] cx88[0]/0: registered device video0 [v4l2]

[    8.666193] cx88[0]/0: registered device vbi0

[    8.666244] cx88[0]/0: registered device radio0

[    8.666382] cx88[0]/1: CX88x/0: ALSA support for cx2388x boards

[    8.667079] input: MCE IR Keyboard/Mouse (cx88xx) as /devices/virtual/input/input25

[    8.667688] lirc_dev: IR Remote Control driver registered, major 248 

[    8.670672] IR SANYO protocol handler initialized

[    8.670681] IR MCE Keyboard/mouse protocol handler initialized

[    8.670976] rc rc0: lirc_dev: driver ir-lirc-codec (cx88xx) registered at minor = 0

[    8.670979] IR LIRC bridge handler initialized

[    8.671092] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 2860, rev 0101 detected

[    8.687559] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0001 detected

[    8.690852] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'

[    8.846777] EXT4-fs (sdc3): re-mounted. Opts: errors=remount-ro

[   10.146497] init: udev-fallback-graphics main process (817) terminated with status 1

[   10.831435] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: (null)

[   13.118483] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)

[   17.972822] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)

[   18.035967] init: failsafe main process (922) killed by TERM signal

[   18.108399] type=1400 audit(1405707339.368:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=1044 comm="apparmor_parser"

[   18.108407] type=1400 audit(1405707339.368:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1044 comm="apparmor_parser"

[   18.108411] type=1400 audit(1405707339.368:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1044 comm="apparmor_parser"

[   18.108770] type=1400 audit(1405707339.368:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1044 comm="apparmor_parser"

[   18.108773] type=1400 audit(1405707339.368:12): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1044 comm="apparmor_parser"

[   18.108961] type=1400 audit(1405707339.368:13): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1044 comm="apparmor_parser"

[   18.110664] type=1400 audit(1405707339.372:14): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=1043 comm="apparmor_parser"

[   18.110669] type=1400 audit(1405707339.372:15): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=1043 comm="apparmor_parser"

[   18.110896] type=1400 audit(1405707339.372:16): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="chromium" pid=1043 comm="apparmor_parser"

[   18.111785] type=1400 audit(1405707339.372:17): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=1048 comm="apparmor_parser"

[   18.179391] Bluetooth: RFCOMM TTY layer initialized

[   18.179402] Bluetooth: RFCOMM socket layer initialized

[   18.179406] Bluetooth: RFCOMM ver 1.11

[   18.181352] Bluetooth: BNEP (Ethernet Emulation) ver 1.3

[   18.181354] Bluetooth: BNEP filters: protocol multicast

[   18.181360] Bluetooth: BNEP socket layer initialized

[   18.201639] init: avahi-cups-reload main process (1108) terminated with status 1

[   18.365863] init: samba-ad-dc main process (1113) terminated with status 1

[   18.732695] vboxdrv: Found 4 processor cores.

[   18.735663] vboxdrv: fAsync=0 offMin=0x432 offMax=0x1d8d

[   18.735736] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.

[   18.735737] vboxdrv: Successfully loaded version 4.3.10_Ubuntu (interface 0x001a0007).

[   18.754517] vboxpci: IOMMU not found (not registered)

[   18.848317] r8169 0000:05:00.0 eth0: link down

[   18.848333] r8169 0000:05:00.0 eth0: link down

[   18.848353] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready

[   18.848628] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready

[   18.849684] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2860.bin'

[   18.849964] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.34

[   18.887265] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready

[   18.887508] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready

[   19.117479] fglrx_pci 0000:01:00.0: irq 53 for MSI/MSI-X

[   19.118075] <6>[fglrx] Firegl kernel thread PID: 1420

[   19.118141] <6>[fglrx] Firegl kernel thread PID: 1421

[   19.118196] <6>[fglrx] Firegl kernel thread PID: 1422

[   19.118296] <6>[fglrx] IRQ 53 Enabled

[   19.125607] <6>[fglrx] Reserved FB block: Shared offset:0, size:1000000 

[   19.125609] <6>[fglrx] Reserved FB block: Unshared offset:f878000, size:4000 

[   19.125610] <6>[fglrx] Reserved FB block: Unshared offset:f87c000, size:484000 

[   19.125611] <6>[fglrx] Reserved FB block: Unshared offset:fff8000, size:8000 

[   19.125612] <6>[fglrx] Reserved FB block: Unshared offset:bfff4000, size:c000 

[   19.875003] init: plymouth-upstart-bridge main process ended, respawning

[   19.878916] init: plymouth-upstart-bridge main process (1425) terminated with status 1

[   19.878926] init: plymouth-upstart-bridge main process ended, respawning

[   20.778152] r8169 0000:05:00.0 eth0: link up

[   20.778160] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

[   22.191068] FS-Cache: Loaded

[   22.201414] FS-Cache: Netfs 'cifs' registered for caching

[   22.201489] Key type cifs.spnego registered

[   22.201497] Key type cifs.idmap registered

[   23.143044] retire_capture_urb: 194 callbacks suppressed

[   29.973545] retire_capture_urb: 93 callbacks suppressed

[   35.008394] retire_capture_urb: 149 callbacks suppressed

[  303.328173] CE: hpet increased min_delta_ns to 20115 nsec

[  317.318348] ptrace of pid 4531 was attempted by: gdb (pid 4551)

[  378.208655] systemd-hostnamed[4603]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!