[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.13.0-32-generic (buildd@kissel) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #57-Ubuntu SMP Tue Jul 15 03:51:08 UTC 2014 (Ubuntu 3.13.0-32.57-generic 3.13.11.4) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-32-generic root=UUID=57dc3c09-fde8-4ccd-bfe5-a99cc87a67d7 ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000097fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000098000-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cfd80fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000cfde0000-0x00000000cfde2fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000cfde3000-0x00000000cfdeffff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000cfdf0000-0x00000000cfdfffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000022fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: Gigabyte Technology Co., Ltd. GA-770TA-UD3/GA-770TA-UD3, BIOS F3 05/13/2010 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x230000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back [ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back [ 0.000000] 3 base 0000CFE00000 mask FFFFFFE00000 uncachable [ 0.000000] 4 base 000100000000 mask FFFF00000000 write-back [ 0.000000] 5 base 000200000000 mask FFFFE0000000 write-back [ 0.000000] 6 base 000220000000 mask FFFFF0000000 write-back [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000000230000000 aka 8960M [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] original variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB [ 0.000000] reg 1, base: 2GB, range: 1GB, type WB [ 0.000000] reg 2, base: 3GB, range: 256MB, type WB [ 0.000000] reg 3, base: 3326MB, range: 2MB, type UC [ 0.000000] reg 4, base: 4GB, range: 4GB, type WB [ 0.000000] reg 5, base: 8GB, range: 512MB, type WB [ 0.000000] reg 6, base: 8704MB, range: 256MB, type WB [ 0.000000] total RAM covered: 3326M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 4M num_reg: 4 lose cover RAM: 0G [ 0.000000] New variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB [ 0.000000] reg 1, base: 2GB, range: 1GB, type WB [ 0.000000] reg 2, base: 3GB, range: 256MB, type WB [ 0.000000] reg 3, base: 3326MB, range: 2MB, type UC [ 0.000000] e820: update [mem 0xcfe00000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xcfd81 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000f4590-0x000f459f] mapped at [ffff8800000f4590] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000092000] 92000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x01fdf000, 0x01fdffff] PGTABLE [ 0.000000] BRK [0x01fe0000, 0x01fe0fff] PGTABLE [ 0.000000] BRK [0x01fe1000, 0x01fe1fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x22fe00000-0x22fffffff] [ 0.000000] [mem 0x22fe00000-0x22fffffff] page 2M [ 0.000000] BRK [0x01fe2000, 0x01fe2fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x22c000000-0x22fdfffff] [ 0.000000] [mem 0x22c000000-0x22fdfffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x200000000-0x22bffffff] [ 0.000000] [mem 0x200000000-0x22bffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0xcfd80fff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x3fffffff] page 2M [ 0.000000] [mem 0x40000000-0xbfffffff] page 1G [ 0.000000] [mem 0xc0000000-0xcfbfffff] page 2M [ 0.000000] [mem 0xcfc00000-0xcfd80fff] page 4k [ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff] [ 0.000000] [mem 0x100000000-0x1ffffffff] page 1G [ 0.000000] RAMDISK: [mem 0x35b66000-0x36daafff] [ 0.000000] ACPI: RSDP 00000000000f5fa0 000014 (v00 GBT ) [ 0.000000] ACPI: RSDT 00000000cfde3000 00003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: FACP 00000000cfde3040 000074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: DSDT 00000000cfde30c0 007475 (v01 GBT GBTUACPI 00001000 MSFT 03000000) [ 0.000000] ACPI: FACS 00000000cfde0000 000040 [ 0.000000] ACPI: SSDT 00000000cfdea600 00088C (v01 PTLTD POWERNOW 00000001 LTP 00000001) [ 0.000000] ACPI: HPET 00000000cfdeaec0 000038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098) [ 0.000000] ACPI: MCFG 00000000cfdeaf00 00003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: TAMG 00000000cfdeaf40 00038A (v01 GBT GBT B0 5455312E BG?? 53450101) [ 0.000000] ACPI: APIC 00000000cfdea540 0000BC (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000022fffffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x22fffffff] [ 0.000000] NODE_DATA [mem 0x22fff9000-0x22fffdfff] [ 0.000000] [ffffea0000000000-ffffea0008bfffff] PMD -> [ffff880227600000-ffff88022f5fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x22fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x00097fff] [ 0.000000] node 0: [mem 0x00100000-0xcfd80fff] [ 0.000000] node 0: [mem 0x100000000-0x22fffffff] [ 0.000000] On node 0 totalpages: 2096408 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3991 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 13239 pages used for memmap [ 0.000000] DMA32 zone: 847233 pages, LIFO batch:31 [ 0.000000] Normal zone: 19456 pages used for memmap [ 0.000000] Normal zone: 1245184 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: [mem 0x00098000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xcfd81000-0xcfddffff] [ 0.000000] PM: Registered nosave memory: [mem 0xcfde0000-0xcfde2fff] [ 0.000000] PM: Registered nosave memory: [mem 0xcfde3000-0xcfdeffff] [ 0.000000] PM: Registered nosave memory: [mem 0xcfdf0000-0xcfdfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xcfe00000-0xdfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xffffffff] [ 0.000000] e820: [mem 0xcfe00000-0xdfffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88022fc00000 s86336 r8192 d24256 u262144 [ 0.000000] pcpu-alloc: s86336 r8192 d24256 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2063628 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-32-generic root=UUID=57dc3c09-fde8-4ccd-bfe5-a99cc87a67d7 ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ 6924000000 size 32 MB [ 0.000000] Aperture beyond 4GB. Ignoring. [ 0.000000] Your BIOS doesn't leave a aperture memory hole [ 0.000000] Please enable the IOMMU option in the BIOS setup [ 0.000000] This costs you 64 MB of RAM [ 0.000000] Mapping aperture over 65536 KB of RAM @ c4000000 [ 0.000000] PM: Registered nosave memory: [mem 0xc4000000-0xc7ffffff] [ 0.000000] Memory: 8086700K/8385632K available (7363K kernel code, 1142K rwdata, 3400K rodata, 1336K init, 1440K bss, 298932K reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8. [ 0.000000] Offload RCU callbacks from all CPUs [ 0.000000] Offload RCU callbacks from CPUs: 0-7. [ 0.000000] NR_IRQS:16640 nr_irqs:744 16 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 33554432 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.004000] tsc: Detected 3415.253 MHz processor [ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 6830.50 BogoMIPS (lpj=13661012) [ 0.000006] pid_max: default: 32768 minimum: 301 [ 0.000026] Security Framework initialized [ 0.000042] AppArmor: AppArmor initialized [ 0.000043] Yama: becoming mindful. [ 0.000488] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.002525] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.003470] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.003478] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.003692] Initializing cgroup subsys memory [ 0.003698] Initializing cgroup subsys devices [ 0.003699] Initializing cgroup subsys freezer [ 0.003701] Initializing cgroup subsys blkio [ 0.003702] Initializing cgroup subsys perf_event [ 0.003704] Initializing cgroup subsys hugetlb [ 0.003720] tseg: 00cfe00000 [ 0.003722] CPU: Physical Processor ID: 0 [ 0.003723] CPU: Processor Core ID: 0 [ 0.003724] mce: CPU supports 6 MCE banks [ 0.003729] LVT offset 0 assigned for vector 0xf9 [ 0.003732] process: using AMD E400 aware idle routine [ 0.003734] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8 [ 0.003734] Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64 [ 0.003734] tlb_flushall_shift: 4 [ 0.003814] Freeing SMP alternatives memory: 32K (ffffffff81e6d000 - ffffffff81e75000) [ 0.004452] ACPI: Core revision 20131115 [ 0.005970] ACPI: All ACPI Tables successfully acquired [ 0.022899] ftrace: allocating 28495 entries in 112 pages [ 0.032830] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.072537] smpboot: CPU0: AMD Phenom(tm) II X4 965 Processor (fam: 10, model: 04, stepping: 03) [ 0.179260] Performance Events: AMD PMU driver. [ 0.179263] ... version: 0 [ 0.179264] ... bit width: 48 [ 0.179264] ... generic registers: 4 [ 0.179265] ... value mask: 0000ffffffffffff [ 0.179266] ... max period: 00007fffffffffff [ 0.179267] ... fixed-purpose events: 0 [ 0.179267] ... event mask: 000000000000000f [ 0.180529] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.180588] x86: Booting SMP configuration: [ 0.193692] process: System has AMD C1E enabled [ 0.193712] process: Switch to broadcast mode on CPU1 [ 0.206801] process: Switch to broadcast mode on CPU2 [ 0.180590] .... node #0, CPUs: #1 #2 #3 [ 0.219849] x86: Booted up 1 node, 4 CPUs [ 0.219851] smpboot: Total of 4 processors activated (27322.02 BogoMIPS) [ 0.219898] process: Switch to broadcast mode on CPU3 [ 0.224233] process: Switch to broadcast mode on CPU0 [ 0.224391] devtmpfs: initialized [ 0.227219] EVM: security.selinux [ 0.227220] EVM: security.SMACK64 [ 0.227221] EVM: security.ima [ 0.227222] EVM: security.capability [ 0.227303] PM: Registering ACPI NVS region [mem 0xcfde0000-0xcfde2fff] (12288 bytes) [ 0.228064] pinctrl core: initialized pinctrl subsystem [ 0.228114] regulator-dummy: no parameters [ 0.228138] RTC time: 19:15:21, date: 07/18/14 [ 0.228169] NET: Registered protocol family 16 [ 0.228249] cpuidle: using governor ladder [ 0.228251] cpuidle: using governor menu [ 0.228254] node 0 link 0: io port [9000, ffff] [ 0.228256] TOM: 00000000d0000000 aka 3328M [ 0.228258] Fam 10h mmconf [mem 0xe0000000-0xe00fffff] [ 0.228259] node 0 link 0: mmio [a0000, bffff] [ 0.228261] node 0 link 0: mmio [d0000000, dfffffff] [ 0.228263] node 0 link 0: mmio [f0000000, fe02ffff] [ 0.228264] node 0 link 0: mmio [e0000000, e06fffff] ==> [e0100000, e06fffff] [ 0.228266] TOM2: 0000000230000000 aka 8960M [ 0.228267] bus: [bus 00-06] on node 0 link 0 [ 0.228268] bus: 00 [io 0x0000-0xffff] [ 0.228269] bus: 00 [mem 0x000a0000-0x000bffff] [ 0.228270] bus: 00 [mem 0xd0000000-0xdfffffff] [ 0.228271] bus: 00 [mem 0xe0700000-0xffffffff] [ 0.228272] bus: 00 [mem 0xe0100000-0xe06fffff] [ 0.228272] bus: 00 [mem 0x230000000-0xfcffffffff] [ 0.228329] ACPI: bus type PCI registered [ 0.228331] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.228375] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.228377] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.235193] PCI: Using configuration type 1 for base access [ 0.235965] bio: create slab at 0 [ 0.236103] ACPI: Added _OSI(Module Device) [ 0.236104] ACPI: Added _OSI(Processor Device) [ 0.236105] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.236106] ACPI: Added _OSI(Processor Aggregator Device) [ 0.240304] ACPI: Interpreter enabled [ 0.240313] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580) [ 0.240316] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580) [ 0.240326] ACPI: (supports S0 S3 S4 S5) [ 0.240327] ACPI: Using IOAPIC for interrupt routing [ 0.240382] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.240449] ACPI: No dock devices found. [ 0.279910] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.279915] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.279919] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.280100] PCI host bridge to bus 0000:00 [ 0.280102] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.280104] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.280105] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.280107] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.280108] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff] [ 0.280109] pci_bus 0000:00: root bus resource [mem 0xcff00000-0xfebfffff] [ 0.280117] pci 0000:00:00.0: [1002:5957] type 00 class 0x060000 [ 0.280127] pci 0000:00:00.0: reg 0x1c: [mem 0xe0000000-0xffffffff 64bit] [ 0.280195] pci 0000:00:02.0: [1002:5978] type 01 class 0x060400 [ 0.280221] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.280255] pci 0000:00:02.0: System wakeup disabled by ACPI [ 0.280278] pci 0000:00:06.0: [1002:597c] type 01 class 0x060400 [ 0.280303] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold [ 0.280334] pci 0000:00:06.0: System wakeup disabled by ACPI [ 0.280353] pci 0000:00:07.0: [1002:597d] type 01 class 0x060400 [ 0.280378] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold [ 0.280409] pci 0000:00:07.0: System wakeup disabled by ACPI [ 0.280429] pci 0000:00:09.0: [1002:597e] type 01 class 0x060400 [ 0.280454] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 0.280484] pci 0000:00:09.0: System wakeup disabled by ACPI [ 0.280504] pci 0000:00:0a.0: [1002:597f] type 01 class 0x060400 [ 0.280529] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 0.280560] pci 0000:00:0a.0: System wakeup disabled by ACPI [ 0.280592] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601 [ 0.280610] pci 0000:00:11.0: reg 0x10: [io 0xff00-0xff07] [ 0.280619] pci 0000:00:11.0: reg 0x14: [io 0xfe00-0xfe03] [ 0.280627] pci 0000:00:11.0: reg 0x18: [io 0xfd00-0xfd07] [ 0.280636] pci 0000:00:11.0: reg 0x1c: [io 0xfc00-0xfc03] [ 0.280644] pci 0000:00:11.0: reg 0x20: [io 0xfb00-0xfb0f] [ 0.280653] pci 0000:00:11.0: reg 0x24: [mem 0xfe02f000-0xfe02f3ff] [ 0.280743] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 [ 0.280755] pci 0000:00:12.0: reg 0x10: [mem 0xfe02e000-0xfe02efff] [ 0.280834] pci 0000:00:12.0: System wakeup disabled by ACPI [ 0.280854] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310 [ 0.280866] pci 0000:00:12.1: reg 0x10: [mem 0xfe02d000-0xfe02dfff] [ 0.280945] pci 0000:00:12.1: System wakeup disabled by ACPI [ 0.280969] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 [ 0.280987] pci 0000:00:12.2: reg 0x10: [mem 0xfe02c000-0xfe02c0ff] [ 0.281064] pci 0000:00:12.2: supports D1 D2 [ 0.281065] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.281100] pci 0000:00:12.2: System wakeup disabled by ACPI [ 0.281125] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 [ 0.281137] pci 0000:00:13.0: reg 0x10: [mem 0xfe02b000-0xfe02bfff] [ 0.281216] pci 0000:00:13.0: System wakeup disabled by ACPI [ 0.281237] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310 [ 0.281249] pci 0000:00:13.1: reg 0x10: [mem 0xfe02a000-0xfe02afff] [ 0.281328] pci 0000:00:13.1: System wakeup disabled by ACPI [ 0.281353] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 [ 0.281371] pci 0000:00:13.2: reg 0x10: [mem 0xfe029000-0xfe0290ff] [ 0.281448] pci 0000:00:13.2: supports D1 D2 [ 0.281449] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.281484] pci 0000:00:13.2: System wakeup disabled by ACPI [ 0.281513] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 [ 0.281639] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a [ 0.281655] pci 0000:00:14.1: reg 0x10: [io 0x0000-0x0007] [ 0.281663] pci 0000:00:14.1: reg 0x14: [io 0x0000-0x0003] [ 0.281671] pci 0000:00:14.1: reg 0x18: [io 0x0000-0x0007] [ 0.281680] pci 0000:00:14.1: reg 0x1c: [io 0x0000-0x0003] [ 0.281688] pci 0000:00:14.1: reg 0x20: [io 0xfa00-0xfa0f] [ 0.281794] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300 [ 0.281814] pci 0000:00:14.2: reg 0x10: [mem 0xfe024000-0xfe027fff 64bit] [ 0.281875] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.281908] pci 0000:00:14.2: System wakeup disabled by ACPI [ 0.281929] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 [ 0.282035] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 [ 0.282093] pci 0000:00:14.4: System wakeup disabled by ACPI [ 0.282113] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 [ 0.282125] pci 0000:00:14.5: reg 0x10: [mem 0xfe028000-0xfe028fff] [ 0.282204] pci 0000:00:14.5: System wakeup disabled by ACPI [ 0.282228] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000 [ 0.282273] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000 [ 0.282316] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000 [ 0.282360] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000 [ 0.282405] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000 [ 0.282486] pci 0000:01:00.0: [1002:6798] type 00 class 0x030000 [ 0.282496] pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.282503] pci 0000:01:00.0: reg 0x18: [mem 0xfdf80000-0xfdfbffff 64bit] [ 0.282508] pci 0000:01:00.0: reg 0x20: [io 0xae00-0xaeff] [ 0.282517] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref] [ 0.282545] pci 0000:01:00.0: supports D1 D2 [ 0.282546] pci 0000:01:00.0: PME# supported from D1 D2 D3hot [ 0.282580] pci 0000:01:00.1: [1002:aaa0] type 00 class 0x040300 [ 0.282589] pci 0000:01:00.1: reg 0x10: [mem 0xfdffc000-0xfdffffff 64bit] [ 0.282635] pci 0000:01:00.1: supports D1 D2 [ 0.289838] pci 0000:00:02.0: PCI bridge to [bus 01] [ 0.289843] pci 0000:00:02.0: bridge window [io 0xa000-0xafff] [ 0.289845] pci 0000:00:02.0: bridge window [mem 0xfdf00000-0xfdffffff] [ 0.289847] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.289893] pci 0000:02:00.0: [197b:2363] type 00 class 0x010601 [ 0.289956] pci 0000:02:00.0: reg 0x24: [mem 0xfdefe000-0xfdefffff] [ 0.290002] pci 0000:02:00.0: PME# supported from D3hot [ 0.290043] pci 0000:02:00.1: [197b:2363] type 00 class 0x010185 [ 0.290058] pci 0000:02:00.1: reg 0x10: [io 0xef00-0xef07] [ 0.290065] pci 0000:02:00.1: reg 0x14: [io 0xee00-0xee03] [ 0.290072] pci 0000:02:00.1: reg 0x18: [io 0xed00-0xed07] [ 0.290079] pci 0000:02:00.1: reg 0x1c: [io 0xec00-0xec03] [ 0.290086] pci 0000:02:00.1: reg 0x20: [io 0xeb00-0xeb0f] [ 0.290153] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.290159] pci 0000:00:06.0: PCI bridge to [bus 02] [ 0.290162] pci 0000:00:06.0: bridge window [io 0xe000-0xefff] [ 0.290164] pci 0000:00:06.0: bridge window [mem 0xfde00000-0xfdefffff] [ 0.290166] pci 0000:00:06.0: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref] [ 0.290206] pci 0000:03:00.0: [1b4b:9128] type 00 class 0x010601 [ 0.290219] pci 0000:03:00.0: reg 0x10: [io 0xdf00-0xdf07] [ 0.290229] pci 0000:03:00.0: reg 0x14: [io 0xde00-0xde03] [ 0.290238] pci 0000:03:00.0: reg 0x18: [io 0xdd00-0xdd07] [ 0.290248] pci 0000:03:00.0: reg 0x1c: [io 0xdc00-0xdc03] [ 0.290257] pci 0000:03:00.0: reg 0x20: [io 0xdb00-0xdb0f] [ 0.290267] pci 0000:03:00.0: reg 0x24: [mem 0xfdcff000-0xfdcff7ff] [ 0.290276] pci 0000:03:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref] [ 0.290320] pci 0000:03:00.0: PME# supported from D3hot [ 0.297844] pci 0000:00:07.0: PCI bridge to [bus 03] [ 0.297848] pci 0000:00:07.0: bridge window [io 0xd000-0xdfff] [ 0.297850] pci 0000:00:07.0: bridge window [mem 0xfdc00000-0xfdcfffff] [ 0.297853] pci 0000:00:07.0: bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref] [ 0.297899] pci 0000:04:00.0: [1033:0194] type 00 class 0x0c0330 [ 0.297913] pci 0000:04:00.0: reg 0x10: [mem 0xfdafe000-0xfdafffff 64bit] [ 0.297978] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 0.305847] pci 0000:00:09.0: PCI bridge to [bus 04] [ 0.305851] pci 0000:00:09.0: bridge window [io 0xc000-0xcfff] [ 0.305853] pci 0000:00:09.0: bridge window [mem 0xfda00000-0xfdafffff] [ 0.305856] pci 0000:00:09.0: bridge window [mem 0xfd900000-0xfd9fffff 64bit pref] [ 0.305899] pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000 [ 0.305911] pci 0000:05:00.0: reg 0x10: [io 0xbe00-0xbeff] [ 0.305929] pci 0000:05:00.0: reg 0x18: [mem 0xfd6ff000-0xfd6fffff 64bit pref] [ 0.305941] pci 0000:05:00.0: reg 0x20: [mem 0xfd6f8000-0xfd6fbfff 64bit pref] [ 0.305949] pci 0000:05:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref] [ 0.305992] pci 0000:05:00.0: supports D1 D2 [ 0.305994] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.313852] pci 0000:00:0a.0: PCI bridge to [bus 05] [ 0.313856] pci 0000:00:0a.0: bridge window [io 0xb000-0xbfff] [ 0.313858] pci 0000:00:0a.0: bridge window [mem 0xfd800000-0xfd8fffff] [ 0.313860] pci 0000:00:0a.0: bridge window [mem 0xfd600000-0xfd6fffff 64bit pref] [ 0.313913] pci 0000:06:08.0: [14f1:8800] type 00 class 0x040000 [ 0.313936] pci 0000:06:08.0: reg 0x10: [mem 0xfa000000-0xfaffffff] [ 0.314072] pci 0000:06:08.1: [14f1:8811] type 00 class 0x048000 [ 0.314095] pci 0000:06:08.1: reg 0x10: [mem 0xfb000000-0xfbffffff] [ 0.314234] pci 0000:06:09.0: [1814:0601] type 00 class 0x028000 [ 0.314254] pci 0000:06:09.0: reg 0x10: [mem 0xfcfe0000-0xfcfeffff] [ 0.314382] pci 0000:06:0e.0: [104c:8024] type 00 class 0x0c0010 [ 0.314403] pci 0000:06:0e.0: reg 0x10: [mem 0xfcfff000-0xfcfff7ff] [ 0.314415] pci 0000:06:0e.0: reg 0x14: [mem 0xfcff8000-0xfcffbfff] [ 0.314502] pci 0000:06:0e.0: supports D1 D2 [ 0.314503] pci 0000:06:0e.0: PME# supported from D0 D1 D2 D3hot [ 0.314552] pci 0000:00:14.4: PCI bridge to [bus 06] (subtractive decode) [ 0.314555] pci 0000:00:14.4: bridge window [io 0x9000-0x9fff] [ 0.314559] pci 0000:00:14.4: bridge window [mem 0xfa000000-0xfcffffff] [ 0.314562] pci 0000:00:14.4: bridge window [mem 0xfd700000-0xfd7fffff pref] [ 0.314563] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.314565] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.314566] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.314567] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode) [ 0.314569] pci 0000:00:14.4: bridge window [mem 0xcff00000-0xfebfffff] (subtractive decode) [ 0.329910] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.329945] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.329977] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.330007] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.330037] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.330066] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.330096] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.330125] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.330489] ACPI: \_SB_.PCI0: notify handler is installed [ 0.330510] Found 1 acpi root devices [ 0.330604] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.330606] vgaarb: loaded [ 0.330607] vgaarb: bridge control possible 0000:01:00.0 [ 0.330737] SCSI subsystem initialized [ 0.330805] libata version 3.00 loaded. [ 0.330820] ACPI: bus type USB registered [ 0.330833] usbcore: registered new interface driver usbfs [ 0.330838] usbcore: registered new interface driver hub [ 0.330859] usbcore: registered new device driver usb [ 0.330949] PCI: Using ACPI for IRQ routing [ 0.339102] PCI: pci_cache_line_size set to 64 bytes [ 0.339108] pci 0000:00:00.0: no compatible bridge window for [mem 0xe0000000-0xffffffff 64bit] [ 0.339175] e820: reserve RAM buffer [mem 0x00098000-0x0009ffff] [ 0.339177] e820: reserve RAM buffer [mem 0xcfd81000-0xcfffffff] [ 0.339239] NetLabel: Initializing [ 0.339240] NetLabel: domain hash size = 128 [ 0.339241] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.339249] NetLabel: unlabeled traffic allowed by default [ 0.339313] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.339316] hpet0: 4 comparators, 32-bit 14.318180 MHz counter [ 0.341383] Switched to clocksource hpet [ 0.344843] AppArmor: AppArmor Filesystem Enabled [ 0.344858] pnp: PnP ACPI init [ 0.344866] ACPI: bus type PNP registered [ 0.344930] system 00:00: [io 0x04d0-0x04d1] has been reserved [ 0.344932] system 00:00: [io 0x0220-0x0225] has been reserved [ 0.344934] system 00:00: [io 0x0290-0x0294] has been reserved [ 0.344937] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.361533] pnp 00:01: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 0.361550] pnp 00:01: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref] [ 0.361558] pnp 00:01: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:03:00.0 BAR 6 [mem 0x00000000-0x0000ffff pref] [ 0.361561] pnp 00:01: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:05:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref] [ 0.361584] system 00:01: [io 0x4100-0x411f] has been reserved [ 0.361586] system 00:01: [io 0x0228-0x022f] has been reserved [ 0.361588] system 00:01: [io 0x040b] has been reserved [ 0.361589] system 00:01: [io 0x04d6] has been reserved [ 0.361591] system 00:01: [io 0x0c00-0x0c01] has been reserved [ 0.361592] system 00:01: [io 0x0c14] has been reserved [ 0.361593] system 00:01: [io 0x0c50-0x0c52] has been reserved [ 0.361595] system 00:01: [io 0x0c6c-0x0c6d] has been reserved [ 0.361596] system 00:01: [io 0x0c6f] has been reserved [ 0.361597] system 00:01: [io 0x0cd0-0x0cd1] has been reserved [ 0.361599] system 00:01: [io 0x0cd2-0x0cd3] has been reserved [ 0.361600] system 00:01: [io 0x0cd4-0x0cdf] has been reserved [ 0.361602] system 00:01: [io 0x4000-0x40fe] could not be reserved [ 0.361603] system 00:01: [io 0x4210-0x4217] has been reserved [ 0.361605] system 00:01: [io 0x0b00-0x0b0f] has been reserved [ 0.361606] system 00:01: [io 0x0b10-0x0b1f] has been reserved [ 0.361608] system 00:01: [io 0x0b20-0x0b3f] has been reserved [ 0.361609] system 00:01: [mem 0xfee00400-0xfee00fff window] has been reserved [ 0.361611] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.361678] pnp 00:02: [dma 4] [ 0.361690] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.361732] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.361759] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.361774] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.361795] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.362015] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.362170] pnp 00:08: Plug and Play ACPI device, IDs PNP0400 (active) [ 0.362264] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved [ 0.362266] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.362349] pnp 00:0a: disabling [mem 0x000d7400-0x000d7fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 0.362351] pnp 00:0a: disabling [mem 0x000f0000-0x000f7fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 0.362353] pnp 00:0a: disabling [mem 0x000f8000-0x000fbfff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 0.362354] pnp 00:0a: disabling [mem 0x000fc000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 0.362356] pnp 00:0a: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 0.362358] pnp 00:0a: disabling [mem 0x00100000-0xcfddffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 0.362390] system 00:0a: [mem 0xcfde0000-0xcfdeffff] could not be reserved [ 0.362392] system 00:0a: [mem 0xffff0000-0xffffffff] has been reserved [ 0.362394] system 00:0a: [mem 0xcfdf0000-0xcfdfffff] has been reserved [ 0.362395] system 00:0a: [mem 0xcfe00000-0xcfefffff] could not be reserved [ 0.362397] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.362398] system 00:0a: [mem 0xfee00000-0xfee00fff] could not be reserved [ 0.362400] system 00:0a: [mem 0xfff80000-0xfffeffff] has been reserved [ 0.362402] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.362414] pnp: PnP ACPI: found 11 devices [ 0.362415] ACPI: bus type PNP unregistered [ 0.369003] pci 0000:01:00.0: BAR 6: assigned [mem 0xfdf00000-0xfdf1ffff pref] [ 0.369005] pci 0000:00:02.0: PCI bridge to [bus 01] [ 0.369007] pci 0000:00:02.0: bridge window [io 0xa000-0xafff] [ 0.369009] pci 0000:00:02.0: bridge window [mem 0xfdf00000-0xfdffffff] [ 0.369011] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.369014] pci 0000:00:06.0: PCI bridge to [bus 02] [ 0.369016] pci 0000:00:06.0: bridge window [io 0xe000-0xefff] [ 0.369018] pci 0000:00:06.0: bridge window [mem 0xfde00000-0xfdefffff] [ 0.369020] pci 0000:00:06.0: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref] [ 0.369022] pci 0000:03:00.0: BAR 6: assigned [mem 0xfdb00000-0xfdb0ffff pref] [ 0.369024] pci 0000:00:07.0: PCI bridge to [bus 03] [ 0.369025] pci 0000:00:07.0: bridge window [io 0xd000-0xdfff] [ 0.369027] pci 0000:00:07.0: bridge window [mem 0xfdc00000-0xfdcfffff] [ 0.369029] pci 0000:00:07.0: bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref] [ 0.369032] pci 0000:00:09.0: PCI bridge to [bus 04] [ 0.369033] pci 0000:00:09.0: bridge window [io 0xc000-0xcfff] [ 0.369035] pci 0000:00:09.0: bridge window [mem 0xfda00000-0xfdafffff] [ 0.369037] pci 0000:00:09.0: bridge window [mem 0xfd900000-0xfd9fffff 64bit pref] [ 0.369040] pci 0000:05:00.0: BAR 6: assigned [mem 0xfd600000-0xfd61ffff pref] [ 0.369041] pci 0000:00:0a.0: PCI bridge to [bus 05] [ 0.369043] pci 0000:00:0a.0: bridge window [io 0xb000-0xbfff] [ 0.369045] pci 0000:00:0a.0: bridge window [mem 0xfd800000-0xfd8fffff] [ 0.369046] pci 0000:00:0a.0: bridge window [mem 0xfd600000-0xfd6fffff 64bit pref] [ 0.369049] pci 0000:00:14.4: PCI bridge to [bus 06] [ 0.369051] pci 0000:00:14.4: bridge window [io 0x9000-0x9fff] [ 0.369056] pci 0000:00:14.4: bridge window [mem 0xfa000000-0xfcffffff] [ 0.369059] pci 0000:00:14.4: bridge window [mem 0xfd700000-0xfd7fffff pref] [ 0.369064] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.369066] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.369067] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.369068] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff] [ 0.369070] pci_bus 0000:00: resource 8 [mem 0xcff00000-0xfebfffff] [ 0.369071] pci_bus 0000:01: resource 0 [io 0xa000-0xafff] [ 0.369072] pci_bus 0000:01: resource 1 [mem 0xfdf00000-0xfdffffff] [ 0.369074] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.369075] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] [ 0.369076] pci_bus 0000:02: resource 1 [mem 0xfde00000-0xfdefffff] [ 0.369078] pci_bus 0000:02: resource 2 [mem 0xfdd00000-0xfddfffff 64bit pref] [ 0.369079] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff] [ 0.369080] pci_bus 0000:03: resource 1 [mem 0xfdc00000-0xfdcfffff] [ 0.369082] pci_bus 0000:03: resource 2 [mem 0xfdb00000-0xfdbfffff 64bit pref] [ 0.369083] pci_bus 0000:04: resource 0 [io 0xc000-0xcfff] [ 0.369084] pci_bus 0000:04: resource 1 [mem 0xfda00000-0xfdafffff] [ 0.369086] pci_bus 0000:04: resource 2 [mem 0xfd900000-0xfd9fffff 64bit pref] [ 0.369087] pci_bus 0000:05: resource 0 [io 0xb000-0xbfff] [ 0.369088] pci_bus 0000:05: resource 1 [mem 0xfd800000-0xfd8fffff] [ 0.369090] pci_bus 0000:05: resource 2 [mem 0xfd600000-0xfd6fffff 64bit pref] [ 0.369091] pci_bus 0000:06: resource 0 [io 0x9000-0x9fff] [ 0.369092] pci_bus 0000:06: resource 1 [mem 0xfa000000-0xfcffffff] [ 0.369094] pci_bus 0000:06: resource 2 [mem 0xfd700000-0xfd7fffff pref] [ 0.369095] pci_bus 0000:06: resource 4 [io 0x0000-0x0cf7] [ 0.369096] pci_bus 0000:06: resource 5 [io 0x0d00-0xffff] [ 0.369097] pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff] [ 0.369099] pci_bus 0000:06: resource 7 [mem 0x000c0000-0x000dffff] [ 0.369100] pci_bus 0000:06: resource 8 [mem 0xcff00000-0xfebfffff] [ 0.369126] NET: Registered protocol family 2 [ 0.369260] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.369447] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.369684] TCP: Hash tables configured (established 65536 bind 65536) [ 0.369717] TCP: reno registered [ 0.369725] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.369767] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.369855] NET: Registered protocol family 1 [ 1.337970] pci 0000:00:13.0: OHCI: BIOS handoff failed (BIOS bug?) 00000184 [ 1.562261] pci 0000:01:00.0: Boot video device [ 1.562393] PCI: CLS 64 bytes, default 64 [ 1.562449] Trying to unpack rootfs image as initramfs... [ 1.795541] Freeing initrd memory: 18708K (ffff880035b66000 - ffff880036dab000) [ 1.795859] PCI-DMA: Disabling AGP. [ 1.795942] PCI-DMA: aperture base @ c4000000 size 65536 KB [ 1.795943] PCI-DMA: using GART IOMMU. [ 1.795945] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 1.799158] LVT offset 1 assigned for vector 0x400 [ 1.799167] IBS: LVT offset 1 assigned [ 1.799190] perf: AMD IBS detected (0x0000001f) [ 1.799224] microcode: CPU0: patch_level=0x010000b6 [ 1.799231] microcode: CPU1: patch_level=0x010000b6 [ 1.799242] microcode: CPU2: patch_level=0x010000b6 [ 1.799251] microcode: CPU3: patch_level=0x010000b6 [ 1.799312] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 1.799313] Scanning for low memory corruption every 60 seconds [ 1.799501] Initialise system trusted keyring [ 1.799537] audit: initializing netlink socket (disabled) [ 1.799547] type=2000 audit(1405710922.680:1): initialized [ 1.819021] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.820084] zbud: loaded [ 1.820209] VFS: Disk quotas dquot_6.5.2 [ 1.820242] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.820611] fuse init (API version 7.22) [ 1.820671] msgmni has been set to 15959 [ 1.820713] Key type big_key registered [ 1.821322] Key type asymmetric registered [ 1.821325] Asymmetric key parser 'x509' registered [ 1.821366] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 1.821424] io scheduler noop registered [ 1.821425] io scheduler deadline registered (default) [ 1.821444] io scheduler cfq registered [ 1.821627] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X [ 1.821726] pcieport 0000:00:06.0: irq 41 for MSI/MSI-X [ 1.821815] pcieport 0000:00:07.0: irq 42 for MSI/MSI-X [ 1.821847] pcieport 0000:00:09.0: irq 43 for MSI/MSI-X [ 1.821936] pcieport 0000:00:0a.0: irq 44 for MSI/MSI-X [ 1.821974] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.821984] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.822010] vesafb: mode is 1920x1080x32, linelength=7680, pages=0 [ 1.822012] vesafb: scrolling: redraw [ 1.822013] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0 [ 1.822256] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90010e80000, using 8128k, total 8128k [ 1.843324] Console: switching to colour frame buffer device 240x67 [ 1.864227] fb0: VESA VGA frame buffer device [ 1.864242] ipmi message handler version 39.2 [ 1.864283] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 1.864286] ACPI: Power Button [PWRB] [ 1.864310] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.864311] ACPI: Power Button [PWRF] [ 1.864331] ACPI: processor limited to max C-state 1 [ 1.864426] GHES: HEST is not enabled! [ 1.864511] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.884977] 00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.886291] Linux agpgart interface v0.103 [ 1.887332] brd: module loaded [ 1.887915] loop: module loaded [ 1.888184] libphy: Fixed MDIO Bus: probed [ 1.888241] tun: Universal TUN/TAP device driver, 1.6 [ 1.888242] tun: (C) 1999-2004 Max Krasnyansky [ 1.888278] PPP generic driver version 2.4.2 [ 1.888314] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.888317] ehci-pci: EHCI PCI platform driver [ 1.888423] ehci-pci 0000:00:12.2: EHCI Host Controller [ 1.888427] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 1.888432] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.888442] ehci-pci 0000:00:12.2: debug port 1 [ 1.888486] ehci-pci 0000:00:12.2: irq 17, io mem 0xfe02c000 [ 1.898271] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 1.898309] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.898311] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.898312] usb usb1: Product: EHCI Host Controller [ 1.898313] usb usb1: Manufacturer: Linux 3.13.0-32-generic ehci_hcd [ 1.898314] usb usb1: SerialNumber: 0000:00:12.2 [ 1.898402] hub 1-0:1.0: USB hub found [ 1.898407] hub 1-0:1.0: 6 ports detected [ 1.898580] ehci-pci 0000:00:13.2: EHCI Host Controller [ 1.898584] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 1.898587] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.898597] ehci-pci 0000:00:13.2: debug port 1 [ 1.898636] ehci-pci 0000:00:13.2: irq 19, io mem 0xfe029000 [ 1.910269] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 1.910301] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.910302] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.910304] usb usb2: Product: EHCI Host Controller [ 1.910305] usb usb2: Manufacturer: Linux 3.13.0-32-generic ehci_hcd [ 1.910306] usb usb2: SerialNumber: 0000:00:13.2 [ 1.910395] hub 2-0:1.0: USB hub found [ 1.910401] hub 2-0:1.0: 6 ports detected [ 1.910487] ehci-platform: EHCI generic platform driver [ 1.910492] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.910493] ohci-pci: OHCI PCI platform driver [ 1.910580] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 1.910584] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3 [ 1.910609] ohci-pci 0000:00:12.0: irq 16, io mem 0xfe02e000 [ 1.970303] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.970306] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.970307] usb usb3: Product: OHCI PCI host controller [ 1.970308] usb usb3: Manufacturer: Linux 3.13.0-32-generic ohci_hcd [ 1.970309] usb usb3: SerialNumber: 0000:00:12.0 [ 1.970410] hub 3-0:1.0: USB hub found [ 1.970417] hub 3-0:1.0: 3 ports detected [ 1.970560] ohci-pci 0000:00:12.1: OHCI PCI host controller [ 1.970564] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4 [ 1.970575] ohci-pci 0000:00:12.1: irq 16, io mem 0xfe02d000 [ 2.030332] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.030334] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.030335] usb usb4: Product: OHCI PCI host controller [ 2.030336] usb usb4: Manufacturer: Linux 3.13.0-32-generic ohci_hcd [ 2.030337] usb usb4: SerialNumber: 0000:00:12.1 [ 2.030443] hub 4-0:1.0: USB hub found [ 2.030450] hub 4-0:1.0: 3 ports detected [ 2.030593] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 2.030597] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 2.030621] ohci-pci 0000:00:13.0: irq 18, io mem 0xfe02b000 [ 2.090362] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.090365] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.090366] usb usb5: Product: OHCI PCI host controller [ 2.090367] usb usb5: Manufacturer: Linux 3.13.0-32-generic ohci_hcd [ 2.090368] usb usb5: SerialNumber: 0000:00:13.0 [ 2.090465] hub 5-0:1.0: USB hub found [ 2.090471] hub 5-0:1.0: 3 ports detected [ 2.090613] ohci-pci 0000:00:13.1: OHCI PCI host controller [ 2.090616] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6 [ 2.090628] ohci-pci 0000:00:13.1: irq 18, io mem 0xfe02a000 [ 2.150394] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.150396] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.150397] usb usb6: Product: OHCI PCI host controller [ 2.150398] usb usb6: Manufacturer: Linux 3.13.0-32-generic ohci_hcd [ 2.150399] usb usb6: SerialNumber: 0000:00:13.1 [ 2.150495] hub 6-0:1.0: USB hub found [ 2.150502] hub 6-0:1.0: 3 ports detected [ 2.150644] ohci-pci 0000:00:14.5: OHCI PCI host controller [ 2.150648] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7 [ 2.150659] ohci-pci 0000:00:14.5: irq 18, io mem 0xfe028000 [ 2.210411] usb 1-5: new high-speed USB device number 2 using ehci-pci [ 2.210428] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.210431] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.210432] usb usb7: Product: OHCI PCI host controller [ 2.210433] usb usb7: Manufacturer: Linux 3.13.0-32-generic ohci_hcd [ 2.210434] usb usb7: SerialNumber: 0000:00:14.5 [ 2.210522] hub 7-0:1.0: USB hub found [ 2.210529] hub 7-0:1.0: 2 ports detected [ 2.210585] ohci-platform: OHCI generic platform driver [ 2.210590] uhci_hcd: USB Universal Host Controller Interface driver [ 2.210643] xhci_hcd 0000:04:00.0: xHCI Host Controller [ 2.210646] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 8 [ 2.210768] xhci_hcd 0000:04:00.0: irq 45 for MSI/MSI-X [ 2.210773] xhci_hcd 0000:04:00.0: irq 46 for MSI/MSI-X [ 2.210778] xhci_hcd 0000:04:00.0: irq 47 for MSI/MSI-X [ 2.210783] xhci_hcd 0000:04:00.0: irq 48 for MSI/MSI-X [ 2.210790] xhci_hcd 0000:04:00.0: irq 49 for MSI/MSI-X [ 2.210864] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.210866] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.210867] usb usb8: Product: xHCI Host Controller [ 2.210868] usb usb8: Manufacturer: Linux 3.13.0-32-generic xhci_hcd [ 2.210869] usb usb8: SerialNumber: 0000:04:00.0 [ 2.210936] hub 8-0:1.0: USB hub found [ 2.210943] hub 8-0:1.0: 2 ports detected [ 2.210989] xhci_hcd 0000:04:00.0: xHCI Host Controller [ 2.210991] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 9 [ 2.214132] usb usb9: New USB device found, idVendor=1d6b, idProduct=0003 [ 2.214133] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.214134] usb usb9: Product: xHCI Host Controller [ 2.214136] usb usb9: Manufacturer: Linux 3.13.0-32-generic xhci_hcd [ 2.214137] usb usb9: SerialNumber: 0000:04:00.0 [ 2.214226] hub 9-0:1.0: USB hub found [ 2.214236] hub 9-0:1.0: 2 ports detected [ 2.218484] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 2.218888] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.218893] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.219004] mousedev: PS/2 mouse device common for all mice [ 2.219127] rtc_cmos 00:04: RTC can wake from S4 [ 2.219228] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 2.219268] rtc_cmos 00:04: alarms up to one month, 242 bytes nvram, hpet irqs [ 2.219314] device-mapper: uevent: version 1.0.3 [ 2.219361] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com [ 2.219367] ledtrig-cpu: registered to indicate activity on CPUs [ 2.219441] TCP: cubic registered [ 2.219502] NET: Registered protocol family 10 [ 2.219630] NET: Registered protocol family 17 [ 2.219637] Key type dns_resolver registered [ 2.219866] Loading compiled-in X.509 certificates [ 2.220667] Loaded X.509 cert 'Magrathea: Glacier signing key: 5e3c0f9ca6e36543535fa2bb5b709e84f16da7c7' [ 2.220674] registered taskstats version 1 [ 2.222775] Key type trusted registered [ 2.224301] Key type encrypted registered [ 2.225847] AppArmor: AppArmor sha1 policy hashing enabled [ 2.225850] IMA: No TPM chip found, activating TPM-bypass! [ 2.226141] regulator-dummy: disabling [ 2.226205] Magic number: 6:95:294 [ 2.226217] misc hpet: hash matches [ 2.226229] tty tty27: hash matches [ 2.226294] rtc_cmos 00:04: setting system clock to 2014-07-18 19:15:23 UTC (1405710923) [ 2.226392] acpi-cpufreq: overriding BIOS provided _PSD data [ 2.226475] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 2.226476] EDD information not available. [ 2.226497] PM: Hibernation image not present or could not be loaded. [ 2.227639] Freeing unused kernel memory: 1336K (ffffffff81d1f000 - ffffffff81e6d000) [ 2.227640] Write protecting the kernel read-only data: 12288k [ 2.229441] Freeing unused kernel memory: 816K (ffff880001734000 - ffff880001800000) [ 2.230907] Freeing unused kernel memory: 696K (ffff880001b52000 - ffff880001c00000) [ 2.241392] systemd-udevd[122]: starting version 204 [ 2.254680] pata_jmicron 0000:02:00.1: enabling device (0000 -> 0001) [ 2.255403] scsi0 : pata_jmicron [ 2.255487] scsi1 : pata_jmicron [ 2.255509] ata1: PATA max UDMA/100 cmd 0xef00 ctl 0xee00 bmdma 0xeb00 irq 19 [ 2.255511] ata2: PATA max UDMA/100 cmd 0xed00 ctl 0xec00 bmdma 0xeb08 irq 19 [ 2.256990] ahci 0000:00:11.0: version 3.0 [ 2.257184] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode [ 2.257186] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc [ 2.258359] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 2.258369] r8169 0000:05:00.0: can't disable ASPM; OS doesn't have ASPM control [ 2.259567] r8169 0000:05:00.0: irq 50 for MSI/MSI-X [ 2.259684] r8169 0000:05:00.0 eth0: RTL8168d/8111d at 0xffffc90000c60000, 6c:f0:49:08:63:ee, XID 083000c0 IRQ 50 [ 2.259686] r8169 0000:05:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 2.260211] scsi2 : ahci [ 2.260297] scsi3 : ahci [ 2.260364] scsi4 : ahci [ 2.260573] scsi5 : ahci [ 2.262041] scsi6 : ahci [ 2.262093] scsi7 : ahci [ 2.262128] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22 [ 2.262131] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22 [ 2.262133] ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22 [ 2.262136] ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22 [ 2.262138] ata7: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f300 irq 22 [ 2.262140] ata8: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f380 irq 22 [ 2.262845] scsi8 : pata_atiixp [ 2.262919] scsi9 : pata_atiixp [ 2.262956] ata9: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14 [ 2.262958] ata10: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15 [ 2.274448] ahci 0000:02:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode [ 2.274452] ahci 0000:02:00.0: flags: 64bit ncq pm led clo pmp pio slum part [ 2.274707] scsi10 : ahci [ 2.274792] scsi11 : ahci [ 2.274825] ata11: SATA max UDMA/133 abar m8192@0xfdefe000 port 0xfdefe100 irq 18 [ 2.274828] ata12: SATA max UDMA/133 abar m8192@0xfdefe000 port 0xfdefe180 irq 18 [ 2.274930] ahci 0000:03:00.0: irq 51 for MSI/MSI-X [ 2.290531] ahci 0000:03:00.0: AHCI 0001.0200 32 slots 8 ports 6 Gbps 0xff impl SATA mode [ 2.290534] ahci 0000:03:00.0: flags: 64bit ncq pio [ 2.291283] scsi12 : ahci [ 2.291356] scsi13 : ahci [ 2.291418] scsi14 : ahci [ 2.291479] scsi15 : ahci [ 2.291541] scsi16 : ahci [ 2.291603] scsi17 : ahci [ 2.291665] scsi18 : ahci [ 2.291728] scsi19 : ahci [ 2.291758] ata13: SATA max UDMA/133 abar m2048@0xfdcff000 port 0xfdcff100 irq 51 [ 2.291760] ata14: SATA max UDMA/133 abar m2048@0xfdcff000 port 0xfdcff180 irq 51 [ 2.291763] ata15: SATA max UDMA/133 abar m2048@0xfdcff000 port 0xfdcff200 irq 51 [ 2.291766] ata16: SATA max UDMA/133 abar m2048@0xfdcff000 port 0xfdcff280 irq 51 [ 2.291768] ata17: SATA max UDMA/133 abar m2048@0xfdcff000 port 0xfdcff300 irq 51 [ 2.291770] ata18: SATA max UDMA/133 abar m2048@0xfdcff000 port 0xfdcff380 irq 51 [ 2.291772] ata19: SATA max UDMA/133 abar m2048@0xfdcff000 port 0xfdcff400 irq 51 [ 2.291774] ata20: SATA max UDMA/133 abar m2048@0xfdcff000 port 0xfdcff480 irq 51 [ 2.314523] firewire_ohci 0000:06:0e.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2 [ 2.351048] usb 1-5: New USB device found, idVendor=1a40, idProduct=0101 [ 2.351051] usb 1-5: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 2.351053] usb 1-5: Product: USB 2.0 Hub [ 2.351195] hub 1-5:1.0: USB hub found [ 2.351297] hub 1-5:1.0: 4 ports detected [ 2.462570] usb 2-3: new high-speed USB device number 2 using ehci-pci [ 2.582660] ata4: SATA link down (SStatus 0 SControl 300) [ 2.586656] ata5: SATA link down (SStatus 0 SControl 300) [ 2.586688] ata8: SATA link down (SStatus 0 SControl 300) [ 2.594600] ata12: SATA link down (SStatus 0 SControl 300) [ 2.598656] ata11: SATA link down (SStatus 0 SControl 300) [ 2.610651] ata20: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.610681] ata18: SATA link down (SStatus 0 SControl 300) [ 2.610710] ata13: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.610735] ata15: SATA link down (SStatus 0 SControl 300) [ 2.610761] ata19: SATA link down (SStatus 0 SControl 300) [ 2.614642] ata16: SATA link down (SStatus 0 SControl 300) [ 2.614671] ata17: SATA link down (SStatus 0 SControl 300) [ 2.717211] ata20.00: ATAPI: MARVELL VIRTUALL, 1.09, max UDMA/66 [ 2.717324] ata20.00: configured for UDMA/66 [ 2.726687] ata14: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.726958] ata14.00: supports DRM functions and may not be fully accessible [ 2.729355] ata13.00: ATA-8: OCZ-AGILITY3, 2.22, max UDMA/133 [ 2.729357] ata13.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 2.729869] ata14.00: disabling queued TRIM support [ 2.729870] ata14.00: ATA-9: Crucial_CT480M500SSD1, MU03, max UDMA/133 [ 2.729872] ata14.00: 937703088 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 2.733475] ata14.00: supports DRM functions and may not be fully accessible [ 2.736422] ata14.00: disabling queued TRIM support [ 2.739234] ata13.00: configured for UDMA/133 [ 2.739699] ata14.00: configured for UDMA/133 [ 2.743838] usb 2-3: New USB device found, idVendor=048d, idProduct=1336 [ 2.743840] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.743841] usb 2-3: Product: Mass Storage Device [ 2.743843] usb 2-3: Manufacturer: Generic [ 2.743844] usb 2-3: SerialNumber: 00000000000006 [ 2.746219] usb-storage 2-3:1.0: USB Mass Storage device detected [ 2.746306] scsi20 : usb-storage 2-3:1.0 [ 2.746345] usbcore: registered new interface driver usb-storage [ 2.754730] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.755281] ata3.00: failed to enable AA (error_mask=0x1) [ 2.755284] ata3.00: ATA-8: VB0250EAVER, HPG7, max UDMA/100 [ 2.755285] ata3.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 2.756022] ata3.00: failed to enable AA (error_mask=0x1) [ 2.756025] ata3.00: configured for UDMA/100 [ 2.756197] scsi 2:0:0:0: Direct-Access ATA VB0250EAVER HPG7 PQ: 0 ANSI: 5 [ 2.756317] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 2.756332] sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 2.756442] sd 2:0:0:0: [sda] Write Protect is off [ 2.756444] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.756461] sd 2:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 2.758722] ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.760435] ata7.00: ATAPI: HL-DT-ST BDDVDRW UH12NS30, 1.00, max UDMA/100 [ 2.761163] ata7.00: configured for UDMA/100 [ 2.762734] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.764081] ata6.00: HPA detected: current 976764911, native 976773168 [ 2.764084] ata6.00: ATA-8: ST3500820AS, SD45, max UDMA/133 [ 2.764085] ata6.00: 976764911 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 2.765855] ata6.00: configured for UDMA/133 [ 2.765986] scsi 5:0:0:0: Direct-Access ATA ST3500820AS SD45 PQ: 0 ANSI: 5 [ 2.766094] sd 5:0:0:0: [sdb] 976764911 512-byte logical blocks: (500 GB/465 GiB) [ 2.766104] sd 5:0:0:0: Attached scsi generic sg1 type 0 [ 2.766134] sd 5:0:0:0: [sdb] Write Protect is off [ 2.766136] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.766168] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.767485] scsi 6:0:0:0: CD-ROM HL-DT-ST BDDVDRW UH12NS30 1.00 PQ: 0 ANSI: 5 [ 2.767844] sda: sda1 [ 2.768144] sd 2:0:0:0: [sda] Attached SCSI disk [ 2.769983] sr0: scsi3-mmc drive: 1x/1x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.769986] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.770080] sr 6:0:0:0: Attached scsi CD-ROM sr0 [ 2.770131] sr 6:0:0:0: Attached scsi generic sg2 type 5 [ 2.770415] scsi 12:0:0:0: Direct-Access ATA OCZ-AGILITY3 2.22 PQ: 0 ANSI: 5 [ 2.770548] sd 12:0:0:0: [sdc] 234441648 512-byte logical blocks: (120 GB/111 GiB) [ 2.770596] sd 12:0:0:0: Attached scsi generic sg3 type 0 [ 2.770729] sd 12:0:0:0: [sdc] Write Protect is off [ 2.770732] sd 12:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 2.770766] scsi 13:0:0:0: Direct-Access ATA Crucial_CT480M50 MU03 PQ: 0 ANSI: 5 [ 2.770775] sd 12:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.770844] sd 13:0:0:0: [sdd] 937703088 512-byte logical blocks: (480 GB/447 GiB) [ 2.770846] sd 13:0:0:0: [sdd] 4096-byte physical blocks [ 2.770873] sd 13:0:0:0: Attached scsi generic sg4 type 0 [ 2.770983] sd 13:0:0:0: [sdd] Write Protect is off [ 2.770985] sd 13:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 2.771026] sd 13:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.771083] scsi 19:0:0:0: Processor Marvell 91xx Config 1.01 PQ: 0 ANSI: 5 [ 2.771165] scsi 19:0:0:0: Attached scsi generic sg5 type 3 [ 2.771225] sdc: sdc2 sdc3 [ 2.771387] sdd: sdd1 sdd2 [ 2.771553] sd 12:0:0:0: [sdc] Attached SCSI disk [ 2.771703] sd 13:0:0:0: [sdd] Attached SCSI disk [ 2.798692] tsc: Refined TSC clocksource calibration: 3415.106 MHz [ 2.814804] firewire_core 0000:06:0e.0: created device fw0: GUID 00314e1b006cf049, S400 [ 2.837892] sdb: sdb1 sdb2 sdb3 sdb4 [ 2.838331] sd 5:0:0:0: [sdb] Attached SCSI disk [ 3.322971] usb 6-1: new low-speed USB device number 2 using ohci-pci [ 3.494141] usb 6-1: New USB device found, idVendor=06a3, idProduct=053c [ 3.494144] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.494146] usb 6-1: Product: Saitek X45 [ 3.494147] usb 6-1: Manufacturer: Saitek [ 3.515621] hidraw: raw HID events driver (C) Jiri Kosina [ 3.525300] usbcore: registered new interface driver usbhid [ 3.525302] usbhid: USB HID core driver [ 3.527162] input: Saitek Saitek X45 as /devices/pci0000:00/0000:00:13.1/usb6/6-1/6-1:1.0/input/input5 [ 3.527243] hid-generic 0003:06A3:053C.0001: input,hidraw0: USB HID v1.00 Joystick [Saitek Saitek X45] on usb-0000:00:13.1-1/input0 [ 3.743857] scsi 20:0:0:0: Direct-Access Generic Storage Device 0.00 PQ: 0 ANSI: 2 [ 3.744043] sd 20:0:0:0: Attached scsi generic sg6 type 0 [ 3.745353] sd 20:0:0:0: [sde] Attached SCSI removable disk [ 3.775235] usb 6-2: new full-speed USB device number 3 using ohci-pci [ 3.799319] Switched to clocksource tsc [ 4.154466] usb 6-2: New USB device found, idVendor=0a12, idProduct=0001 [ 4.154468] usb 6-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 4.154470] usb 6-2: Product: BT2.0 [ 4.231485] usb 1-5.2: new full-speed USB device number 3 using ehci-pci [ 4.325392] usb 1-5.2: New USB device found, idVendor=e0ff, idProduct=0005 [ 4.325395] usb 1-5.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.325396] usb 1-5.2: Product: USB Device [ 4.325397] usb 1-5.2: Manufacturer: Areson [ 4.326657] input: Areson USB Device as /devices/pci0000:00/0000:00:12.2/usb1/1-5/1-5.2/1-5.2:1.0/input/input6 [ 4.326744] hid-generic 0003:E0FF:0005.0002: input,hidraw1: USB HID v1.00 Mouse [Areson USB Device] on usb-0000:00:12.2-5.2/input0 [ 4.329956] input: Areson USB Device as /devices/pci0000:00/0000:00:12.2/usb1/1-5/1-5.2/1-5.2:1.1/input/input7 [ 4.330074] hid-generic 0003:E0FF:0005.0003: input,hiddev0,hidraw2: USB HID v1.00 Keyboard [Areson USB Device] on usb-0000:00:12.2-5.2/input1 [ 4.403798] usb 1-5.3: new full-speed USB device number 4 using ehci-pci [ 4.498706] usb 1-5.3: New USB device found, idVendor=046d, idProduct=c22e [ 4.498708] usb 1-5.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.498710] usb 1-5.3: Product: G510 Gaming Keyboard [ 4.498711] usb 1-5.3: Manufacturer: Logitech [ 4.504827] input: Logitech G510 Gaming Keyboard as /devices/pci0000:00/0000:00:12.2/usb1/1-5/1-5.3/1-5.3:1.0/input/input8 [ 4.504895] hid-generic 0003:046D:C22E.0004: input,hidraw3: USB HID v1.11 Keyboard [Logitech G510 Gaming Keyboard] on usb-0000:00:12.2-5.3/input0 [ 4.510380] input: Logitech G510 Gaming Keyboard as /devices/pci0000:00/0000:00:12.2/usb1/1-5/1-5.3/1-5.3:1.1/input/input9 [ 4.510469] hid-generic 0003:046D:C22E.0005: input,hiddev0,hidraw4: USB HID v1.11 Device [Logitech G510 Gaming Keyboard] on usb-0000:00:12.2-5.3/input1 [ 7.888938] random: nonblocking pool is initialized [ 7.890214] EXT4-fs (sdc3): INFO: recovery required on readonly filesystem [ 7.890215] EXT4-fs (sdc3): write access will be enabled during recovery [ 8.008005] EXT4-fs (sdc3): recovery complete [ 8.008470] EXT4-fs (sdc3): mounted filesystem with ordered data mode. Opts: (null) [ 8.089932] init: plymouth-upstart-bridge main process (228) terminated with status 1 [ 8.089942] init: plymouth-upstart-bridge main process ended, respawning [ 8.094717] init: plymouth-upstart-bridge main process (238) terminated with status 1 [ 8.094726] init: plymouth-upstart-bridge main process ended, respawning [ 8.098346] init: plymouth-upstart-bridge main process (241) terminated with status 1 [ 8.098355] init: plymouth-upstart-bridge main process ended, respawning [ 8.098425] init: ureadahead main process (231) terminated with status 5 [ 8.100627] init: plymouth-upstart-bridge main process (245) terminated with status 1 [ 8.100635] init: plymouth-upstart-bridge main process ended, respawning [ 8.164667] Adding 10485756k swap on /dev/sdb4. Priority:-1 extents:1 across:10485756k FS [ 8.190201] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 8.225489] systemd-udevd[362]: starting version 204 [ 8.266287] lp: driver loaded but no devices found [ 8.271649] ppdev: user-space parallel port driver [ 8.274297] parport_pc 00:08: reported by Plug and Play ACPI [ 8.274349] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 8.291024] wmi: Mapper loaded [ 8.294527] AMD IOMMUv2 driver by Joerg Roedel [ 8.294529] AMD IOMMUv2 functionality not available on this system [ 8.356447] ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \SOR1 1 (20131115/utaddress-251) [ 8.356454] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 8.362809] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05 [ 8.362889] sp5100_tco: PCI Revision ID: 0x3c [ 8.362907] sp5100_tco: failed to find MMIO address, giving up. [ 8.369675] lp0: using parport0 (interrupt-driven). [ 8.370145] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [ 8.370148] Disabling lock debugging due to kernel taint [ 8.382364] type=1400 audit(1405707329.648:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=432 comm="apparmor_parser" [ 8.382371] type=1400 audit(1405707329.648:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=432 comm="apparmor_parser" [ 8.382375] type=1400 audit(1405707329.648:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=432 comm="apparmor_parser" [ 8.382690] hda-intel 0000:00:14.2: Using LPIB position fix [ 8.382753] type=1400 audit(1405707329.648:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=432 comm="apparmor_parser" [ 8.382757] type=1400 audit(1405707329.648:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=432 comm="apparmor_parser" [ 8.382946] type=1400 audit(1405707329.648:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=432 comm="apparmor_parser" [ 8.386356] Linux video capture interface: v2.00 [ 8.387868] fglrx: module verification failed: signature and/or required key missing - tainting kernel [ 8.388723] hda-intel 0000:00:14.2: Enable sync_write for stable communication [ 8.395507] <6>[fglrx] Maximum main memory to use for locked dma buffers: 7749 MBytes. [ 8.395715] <6>[fglrx] vendor: 1002 device: 6798 count: 1 [ 8.396065] <6>[fglrx] ioport: bar 4, base 0xae00, size: 0x100 [ 8.396284] <6>[fglrx] Kernel PAT support is enabled [ 8.396301] <6>[fglrx] module loaded - fglrx 13.35.5 [Mar 12 2014] with 1 minors [ 8.405334] SKU: Nid=0x1d sku_cfg=0x4005e601 [ 8.405337] SKU: port_connectivity=0x1 [ 8.405338] SKU: enable_pcbeep=0x0 [ 8.405338] SKU: check_sum=0x00000005 [ 8.405339] SKU: customization=0x000000e6 [ 8.405340] SKU: external_amp=0x0 [ 8.405341] SKU: platform_type=0x0 [ 8.405341] SKU: swap=0x0 [ 8.405342] SKU: override=0x1 [ 8.406022] autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line [ 8.406025] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 8.406026] hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 8.406026] mono: mono_out=0x0 [ 8.406027] dig-out=0x1e/0x0 [ 8.406028] inputs: [ 8.406029] Rear Mic=0x18 [ 8.406030] Front Mic=0x19 [ 8.406031] Line=0x1a [ 8.406032] CD=0x1c [ 8.406033] dig-in=0x1f [ 8.406034] realtek: No valid SSID, checking pincfg 0x4005e601 for NID 0x1d [ 8.406034] realtek: Enabling init ASM_ID=0xe601 CODEC_ID=10ec0888 [ 8.406417] cfg80211: Calling CRDA to update world regulatory domain [ 8.409411] MCE: In-kernel MCE decoding enabled. [ 8.412779] EDAC MC: Ver: 3.0.0 [ 8.416904] AMD64 EDAC driver v3.4.0 [ 8.426573] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input17 [ 8.426620] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input16 [ 8.426652] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input15 [ 8.426684] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input14 [ 8.426715] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input13 [ 8.426746] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input12 [ 8.426778] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input11 [ 8.426810] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input10 [ 8.427032] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client [ 8.427033] hda-intel 0000:01:00.1: Using LPIB position fix [ 8.427034] hda-intel 0000:01:00.1: Force to non-snoop mode [ 8.427068] snd_hda_intel 0000:01:00.1: irq 52 for MSI/MSI-X [ 8.427090] EDAC amd64: DRAM ECC disabled. [ 8.427097] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. [ 8.427097] Either enable ECC checking or force module loading by setting 'ecc_enable_override'. [ 8.427097] (Note that use of the override may cause unknown side effects.) [ 8.429534] hda-intel 0000:01:00.1: Enable sync_write for stable communication [ 8.431349] cx88[0]: subsystem: 0070:3401, board: Hauppauge WinTV 34xxx models [card=1,autodetected], frontend(s): 0 [ 8.442254] input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input23 [ 8.442326] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input22 [ 8.442449] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input21 [ 8.442489] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input20 [ 8.442528] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input19 [ 8.442571] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input18 [ 8.461032] Bluetooth: Core ver 2.17 [ 8.461051] NET: Registered protocol family 31 [ 8.461052] Bluetooth: HCI device and connection manager initialized [ 8.461061] Bluetooth: HCI socket layer initialized [ 8.461063] Bluetooth: L2CAP socket layer initialized [ 8.461066] Bluetooth: SCO socket layer initialized [ 8.465850] usbcore: registered new interface driver btusb [ 8.498394] kvm: Nested Virtualization enabled [ 8.498399] kvm: Nested Paging enabled [ 8.501898] usbcore: registered new interface driver snd-usb-audio [ 8.576187] tuner 0-0061: Tuner -1 found with type(s) Radio TV. [ 8.621875] tveeprom 0-0050: Hauppauge model 34715, rev E124, serial# 7011228 [ 8.621878] tveeprom 0-0050: tuner model is Philips FM1246 (idx 24, type 1) [ 8.621880] tveeprom 0-0050: TV standards PAL(I) (eeprom 0x10) [ 8.621882] tveeprom 0-0050: audio processor is CX881 (idx 31) [ 8.621882] tveeprom 0-0050: has radio [ 8.621884] cx88[0]: warning: unknown hauppauge model #34715 [ 8.621884] cx88[0]: hauppauge eeprom: model=34715 [ 8.626579] cfg80211: World regulatory domain updated: [ 8.626582] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 8.626584] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 8.626585] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 8.626586] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 8.626587] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 8.626588] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 8.630324] tuner-simple 0-0061: creating new instance [ 8.630327] tuner-simple 0-0061: type set to 1 (Philips PAL_I (FI1246 and compatibles)) [ 8.661731] Registered IR keymap rc-hauppauge [ 8.661822] input: cx88 IR (Hauppauge WinTV 34xxx as /devices/pci0000:00/0000:00:14.4/0000:06:08.0/rc/rc0/input24 [ 8.661871] rc0: cx88 IR (Hauppauge WinTV 34xxx as /devices/pci0000:00/0000:00:14.4/0000:06:08.0/rc/rc0 [ 8.664117] IR RC5(x) protocol handler initialized [ 8.664138] IR JVC protocol handler initialized [ 8.664589] IR NEC protocol handler initialized [ 8.664738] IR RC6 protocol handler initialized [ 8.664973] cx88[0]/0: found at 0000:06:08.0, rev: 3, irq: 22, latency: 32, mmio: 0xfa000000 [ 8.665898] IR Sony protocol handler initialized [ 8.666134] cx88[0]/0: registered device video0 [v4l2] [ 8.666193] cx88[0]/0: registered device vbi0 [ 8.666244] cx88[0]/0: registered device radio0 [ 8.666382] cx88[0]/1: CX88x/0: ALSA support for cx2388x boards [ 8.667079] input: MCE IR Keyboard/Mouse (cx88xx) as /devices/virtual/input/input25 [ 8.667688] lirc_dev: IR Remote Control driver registered, major 248 [ 8.670672] IR SANYO protocol handler initialized [ 8.670681] IR MCE Keyboard/mouse protocol handler initialized [ 8.670976] rc rc0: lirc_dev: driver ir-lirc-codec (cx88xx) registered at minor = 0 [ 8.670979] IR LIRC bridge handler initialized [ 8.671092] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 2860, rev 0101 detected [ 8.687559] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0001 detected [ 8.690852] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 8.846777] EXT4-fs (sdc3): re-mounted. Opts: errors=remount-ro [ 10.146497] init: udev-fallback-graphics main process (817) terminated with status 1 [ 10.831435] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: (null) [ 13.118483] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null) [ 17.972822] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null) [ 18.035967] init: failsafe main process (922) killed by TERM signal [ 18.108399] type=1400 audit(1405707339.368:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=1044 comm="apparmor_parser" [ 18.108407] type=1400 audit(1405707339.368:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1044 comm="apparmor_parser" [ 18.108411] type=1400 audit(1405707339.368:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1044 comm="apparmor_parser" [ 18.108770] type=1400 audit(1405707339.368:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1044 comm="apparmor_parser" [ 18.108773] type=1400 audit(1405707339.368:12): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1044 comm="apparmor_parser" [ 18.108961] type=1400 audit(1405707339.368:13): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1044 comm="apparmor_parser" [ 18.110664] type=1400 audit(1405707339.372:14): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=1043 comm="apparmor_parser" [ 18.110669] type=1400 audit(1405707339.372:15): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=1043 comm="apparmor_parser" [ 18.110896] type=1400 audit(1405707339.372:16): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="chromium" pid=1043 comm="apparmor_parser" [ 18.111785] type=1400 audit(1405707339.372:17): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=1048 comm="apparmor_parser" [ 18.179391] Bluetooth: RFCOMM TTY layer initialized [ 18.179402] Bluetooth: RFCOMM socket layer initialized [ 18.179406] Bluetooth: RFCOMM ver 1.11 [ 18.181352] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 18.181354] Bluetooth: BNEP filters: protocol multicast [ 18.181360] Bluetooth: BNEP socket layer initialized [ 18.201639] init: avahi-cups-reload main process (1108) terminated with status 1 [ 18.365863] init: samba-ad-dc main process (1113) terminated with status 1 [ 18.732695] vboxdrv: Found 4 processor cores. [ 18.735663] vboxdrv: fAsync=0 offMin=0x432 offMax=0x1d8d [ 18.735736] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. [ 18.735737] vboxdrv: Successfully loaded version 4.3.10_Ubuntu (interface 0x001a0007). [ 18.754517] vboxpci: IOMMU not found (not registered) [ 18.848317] r8169 0000:05:00.0 eth0: link down [ 18.848333] r8169 0000:05:00.0 eth0: link down [ 18.848353] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 18.848628] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 18.849684] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2860.bin' [ 18.849964] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.34 [ 18.887265] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 18.887508] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 19.117479] fglrx_pci 0000:01:00.0: irq 53 for MSI/MSI-X [ 19.118075] <6>[fglrx] Firegl kernel thread PID: 1420 [ 19.118141] <6>[fglrx] Firegl kernel thread PID: 1421 [ 19.118196] <6>[fglrx] Firegl kernel thread PID: 1422 [ 19.118296] <6>[fglrx] IRQ 53 Enabled [ 19.125607] <6>[fglrx] Reserved FB block: Shared offset:0, size:1000000 [ 19.125609] <6>[fglrx] Reserved FB block: Unshared offset:f878000, size:4000 [ 19.125610] <6>[fglrx] Reserved FB block: Unshared offset:f87c000, size:484000 [ 19.125611] <6>[fglrx] Reserved FB block: Unshared offset:fff8000, size:8000 [ 19.125612] <6>[fglrx] Reserved FB block: Unshared offset:bfff4000, size:c000 [ 19.875003] init: plymouth-upstart-bridge main process ended, respawning [ 19.878916] init: plymouth-upstart-bridge main process (1425) terminated with status 1 [ 19.878926] init: plymouth-upstart-bridge main process ended, respawning [ 20.778152] r8169 0000:05:00.0 eth0: link up [ 20.778160] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 22.191068] FS-Cache: Loaded [ 22.201414] FS-Cache: Netfs 'cifs' registered for caching [ 22.201489] Key type cifs.spnego registered [ 22.201497] Key type cifs.idmap registered [ 23.143044] retire_capture_urb: 194 callbacks suppressed [ 29.973545] retire_capture_urb: 93 callbacks suppressed [ 35.008394] retire_capture_urb: 149 callbacks suppressed [ 303.328173] CE: hpet increased min_delta_ns to 20115 nsec [ 317.318348] ptrace of pid 4531 was attempted by: gdb (pid 4551) [ 378.208655] systemd-hostnamed[4603]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!