Bug #23370
Heat generation of ISRU and Drill is not added properly
10%
Description
Description:
A craft with 6 Drill-O-Matics and a Convert-O-Tron 250 can be cooled with 4 Medium Termal Control Systems.
How to Replicate:
A Craft with an Engineer, Oretank, 16 Fuel Cell Arrays, 6 Large Drills and a big Convertron can run at full efficiency with one recipe and 6 drills active on one TCS. Only two more Medium TCS are required for a total of three recipes
Expected:
Each ressource part sould add to the total required cooling, expected is the need for 4 TCS for peak termal efficiency with 6 drills and one recipe.
In addition the ISRU is able to run with 3 recipes and 3 meduim TCS at full efficiency, which should not be possible.
| 1Rec_1.jpg (764 KB) 1Rec_1.jpg | one ISRU recipe and 6 large drills on one TCS detailed part1 | ||
| 1Rec_2.jpg (762 KB) 1Rec_2.jpg | one ISRU recipe and 6 large drills on one TCS detailed part2 | ||
| 3Rec.jpg (826 KB) 3Rec.jpg | 3 active recipies at 125% load constant |
History
#2
Updated by victorr over 4 years ago
Updated by - Status changed from New to Confirmed
- % Done changed from 0 to 10
#3
Updated by jclovis3 over 4 years ago
Updated by 
I don't think this is the case.
Each recipe requires cooling of 200 kW. Each drill requires cooling of 100 kW. The medium thermal control system cools 250 kW. If you have 4 then you can cool up to 1000 kW. 6 drills will need 600 kW and that still leaves 400 kW, enough to cool 2 recipes. For 3 recipes, you would need one more medium or two small.
#4
Updated by victorr over 4 years ago
- Assignee set to victorr