Bug #5530
Reproducible Segmentation fault when quitting.
100%
Description
Debian sid, fglrx.
No mods, absolutely new, clean install, even no changed settings.
Happens even if i just start KSP, and then immediately quit.
Once i quit, the last entry in terminal is:
$ ./KSP.x86_64
Set current directory to ~/KSP_linux/KSP_linux
Found path: ~/KSP_linux/KSP_linux/KSP.x86_64
Mono path[0] = '~/KSP_linux/KSP_linux/KSP_Data/Managed'
Mono path[1] = '~/KSP_linux/KSP_linux/KSP_Data/Mono'
Mono config path = '~/KSP_linux/KSP_linux/KSP_Data/Mono/etc'
/dev/input/js0: driver version: 2.1.0 (20100)
: Too many axes; using axes 0 - 19 and ignoring axes 20 - 36
: Too many buttons; using buttons 0 - 19 and ignoring buttons 20 - 68
/dev/input/js0: fd 3, buttons 20, axes 20, name A4TECH USB Device
/dev/input/js0: axis 0: raw -32767, mapped 0.000000
/dev/input/js0: axis 1: raw -32767, mapped 0.000000
/dev/input/js0: axis 2: raw -32767, mapped 0.000000
/dev/input/js0: axis 3: raw -32767, mapped 0.000000
/dev/input/js0: axis 4: raw -32767, mapped 0.000000
/dev/input/js0: axis 5: raw -32767, mapped 0.000000
/dev/input/js0: axis 6: raw -32767, mapped 0.000000
/dev/input/js0: axis 7: raw -32767, mapped 0.000000
/dev/input/js0: axis 8: raw -32767, mapped 0.000000
/dev/input/js0: axis 9: raw -32767, mapped 0.000000
/dev/input/js0: axis 10: raw 0, mapped 0.000000
/dev/input/js0: axis 11: raw 0, mapped 0.000000
/dev/input/js0: axis 12: raw -32767, mapped 0.000000
/dev/input/js0: axis 13: raw -32767, mapped 0.000000
/dev/input/js0: axis 14: raw -32767, mapped 0.000000
/dev/input/js0: axis 15: raw -32767, mapped 0.000000
/dev/input/js0: axis 16: raw -32767, mapped 0.000000
/dev/input/js0: axis 17: raw -32767, mapped 0.000000
/dev/input/js0: axis 18: raw -32767, mapped 0.000000
/dev/input/js0: axis 19: raw -32767, mapped 0.000000
/dev/input/js0: axis 20: raw -32767, mapped 0.000000
Segmentation fault
This happens every time.
History
#1
Updated by lebedev.ri over 8 years ago
Updated by And in dmesg:[13655.912293] traps: KSP.x86_64[16658] general protection ip:7ff1573bf377 sp:7fff81a50940 error:0 in libX11.so.6.3.0[7ff157399000+13c000]
[23603.890178] traps: KSP.x86_64[10660] general protection ip:7f6b8555f377 sp:7ffca7374620 error:0 in libX11.so.6.3.0[7f6b85539000+13c000]
[23828.240079] traps: KSP.x86_64[11196] general protection ip:7f5a84a37377 sp:7fff748a4fc0 error:0 in libX11.so.6.3.0[7f5a84a11000+13c000]
#2
Updated by lebedev.ri over 8 years ago
gdb:
Program received signal SIGSEGV, Segmentation fault.
0x00007ffff702a377 in XForceScreenSaver (dpy=0x1a42da0, mode=1) at ../../src/FSSaver.c:53
53 ../../src/FSSaver.c: No such file or directory.
(gdb) thread apply all bt full
Thread 2 (Thread 0x7ffff7fdc700 (LWP 12470)):
#0 0x00007ffff79ca18d in nanosleep () at ../sysdeps/unix/syscall-template.S:81
No locals.
#1 0x00007ffff4fd214d in ?? () from /home/lebedevri/KSP_linux/KSP_linux/KSP_Data/Mono/x86_64/libmono.so
No symbol table info available.
#2 0x00007ffff79c30a4 in start_thread (arg=0x7ffff7fdc700) at pthread_create.c:309
__res = <optimized out>
pd = 0x7ffff7fdc700
now = <optimized out>
unwind_buf = {cancel_jmp_buf = {{jmp_buf = {140737353991936, 1365188317788037865, 0, 140737354125408, 140737302984492, 140737353991936, -1365170740629544215, -1365170461010369815}, mask_was_saved = 0}}, priv = {pad = {0x0, 0x0, 0x0, 0x0}, data = {prev = 0x0,
cleanup = 0x0, canceltype = 0}}}
not_first_call = <optimized out>
pagesize_m1 = <optimized out>
sp = <optimized out>
freesize = <optimized out>
__PRETTY_FUNCTION__ = "start_thread"
#3 0x00007ffff62a406d in clone () at ../sysdeps/unix/sysv/linux/x86_64/clone.S:111
No locals.
Thread 1 (Thread 0x7ffff7fb4740 (LWP 12466)):
#0 0x00007ffff702a377 in XForceScreenSaver (dpy=0x1a42da0, mode=1) at ../../src/FSSaver.c:53
req = <optimized out>
#1 0x000000000042dffd in ?? ()
No symbol table info available.
#2 0x00007ffff61dfb45 in __libc_start_main (main=0x42d0c0, argc=1, argv=0x7fffffffdeb8, init=<optimized out>, fini=<optimized out>, rtld_fini=<optimized out>, stack_end=0x7fffffffdea8) at libc-start.c:287
result = <optimized out>
unwind_buf = {cancel_jmp_buf = {{jmp_buf = {0, 1365188317788037865, 4388968, 140737488346800, 0, 0, -1365188318798224663, -1365167169268161815}, mask_was_saved = 0}}, priv = {pad = {0x0, 0x0, 0x1290df0, 0x7fffffffdeb8}, data = {prev = 0x0, cleanup = 0x0,
canceltype = 19467760}}}
not_first_call = <optimized out>
#3 0x000000000042f891 in ?? ()
No symbol table info available.
#4 0x00007fffffffdea8 in ?? ()
No symbol table info available.
#5 0x000000000000001c in ?? ()
No symbol table info available.
#6 0x0000000000000001 in ?? ()
No symbol table info available.
#7 0x00007fffffffe223 in ?? ()
No symbol table info available.
#8 0x0000000000000000 in ?? ()
No symbol table info available.
#3
Updated by TriggerAu almost 8 years ago
Updated by - Status changed from New to Needs Clarification
#4
Updated by lebedev.ri almost 8 years ago
- Status changed from Needs Clarification to Resolved
- % Done changed from 0 to 100
#5
Updated by TriggerAu over 7 years ago
- Status changed from Resolved to Closed